Search results
10 pc. nozzle kit for P80 torches
1.5 mm diameter orifice for 70-80 amp operation
Fits older model PowerPlasma and PowerPro units with HF start
Check torch neck to confirm torch ID before ordering
Replaces Panasonic #TET01512
5 pc shielding cup kit for P80 torches
Fits older model PowerPlasma and PowerPro units with HF start
Check torch neck to confirm torch ID before ordering
Replaces Panasonic # TGN02004
10 pc shielding cup for P80 torches
Fits older model PowerPlasma and PowerPro units with HF start
Check torch neck to confirm torch ID before ordering
Replaces Panasonic #TGN02004
25 pc consumable 80 Amp kit for P80 torches
Fits older model PowerPlasma and PowerPro units with HF start
10 electrodes
10 1.5 mm nozzles (tips)
5 Ceramic shielding cups
Foot Pedal by Everlast Welders. Offers greater control with reduced maintenance issues over previous models. Solid feeling rack and pinion type operation delivers a lower profile and more compact footprint. More resistant to tipping and skidding than previous economy...
SM200N-MTS Spool Gun designed to fit most PowerMTS units and must be limited to 200 amps or less. Great choice for hobby, general repair and fabrication, farm, ranch and light production work.
It uses small pin connector for control and utilizes speed control located in handle. In case of...
50 pc consumable 80 Amp kit for P80 torches
Fits older model PowerPlasma and PowerPro units with HF start
20 electrodes
20 1.5 mm nozzles (tips)
10 Ceramic shielding cups
70 pieces consumable 80 Amp kit for P80 torches
Fits older model PowerPlasma and PowerPro units with HF start
30 electrodes
30 1.5 mm nozzles (tips)
10 Ceramic shielding cups
Designed to fit PowerMTS 400 wire feeder
36 Series Gun has euro quick connect and 10 ft / 3 m cable
Good selection for heavy duty use with the Power i-MIG 250, 250P and MTS250S
Tolerates heat generated with higher Amp welding and axial spray mode
Std liner up to .045"
Air-cooled torch...
Designed to fit PowerMTS 400 wire feeder
36 Series Gun has euro quick connect and 15 ft / 5 m cable
Good selection for heavy duty use with the Power i-MIG 250, 250P and MTS250S
Tolerates heat generated with higher Amp welding and axial spray mode
Std liner up to .045"
Air-cooled torch...
MIG Contact Tip Kit 0.023" (0.6mm)
M6 thread
For SN-15 and 15 series MIG Guns
Light-Duty design
E-CU (copper)
10 piece kit
Contact Tip Kit .035" (0.9mm)
M6 thread
Light Duty design
For 15, 24, and 25 series MIG guns
10 piece kit
E-CU copper
MIG Contact Tip Kit 0.045" (1.2mm)
M6 thread
For SN-15 and 15 series MIG Guns
Light-Duty design
E-CU (copper)
10 piece kit
MIG Contact Tip Kit 0.023" (0.6mm)
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (copper/chromium/zirconium)
10 piece kit
MIG Contact Tip Kit 0.030" (0.8mm)
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (copper/chromium/zirconium)
10 piece kit
MIG Contact Tip Kit 0.035" (0.9mm)
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (copper/chromium/zirconium)
10 piece kit
MIG Contact Tip Kit 0.045" (1.2mm)
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (copper/chromium/zirconium)
10 piece kit
Set of three Conical Nozzles for SN-15 and 15 series MIG Guns.
12x53mm MIG Gun Nozzle
Approximately 15/32" opening (12mm)
Interchanges with Trafimet® MC0018
Interchanges with Binzel® 145.0075
Fits Trafimet® ErgoPlus 15
Fits Binzel® MB15AK
Fits Everlast SN-15 and 15 series MIG Guns...
Set of three Cylindrical Nozzles for SN-15 and 15 series MIG Guns.
16x53mm Nozzle
Cylindrical Shape
Approximately 5/8" opening (16mm)
Interchanges with Trafimet® MC0019
Interchanges with Binzel® 145.0041
Fits Trafimet® ErgoPlus 15
Fits Binzel® MB15AK
Fits Everlast SN-15 and 15...
Set of three Conical Nozzles for SN-24, 24 series MIG Guns and SM200N series Spool Guns.
12.5x63.5mm MIG Gun Nozzle
Approximately 1/2 inch opening (12.5mm)
Interchanges with Trafimet® MC0301
Interchages with Binzel® 145.0080
Fits Trafimet® ErgoPlus 24
Fits Binzel® MB24KD
Fits...
Set of three Cylindrical Nozzles for SN-24, 24 series MIG Guns and SM200N series Spool Guns.
17x63.5mm MIG Gun Nozzle
Approximately 11/16" opening (17mm)
Interchanges with Trafimet® MC0300
Interchages with Binzel® 145.0047
Fits Trafimet® ErgoPlus 24
Fits Binzel® MB24KD
Fits...
Set of three Spot Weld Nozzles for SN-24, 24 series MIG Guns and SM200N series Spool Guns.
17x53mm Spot Weld MIG Gun Nozzle
Designed for direct contact spot welding
Interchanges with Trafimet® MC0303
Fits Trafimet® ErgoPlus 24
Fits Binzel® MB24KD
Fits Everlast SN-24, 24...
15x57mm MIG Gun Nozzle
Approximately 9/16" opening (15mm)
Base width 22mm
Interchanges with Trafimet® MC0023
Interchanges with Binzel® 145.0076
Fits Trafimet® ErgoPlus 25
Fits Binzel® MB25AK
Fits Everlast EV-25
18x57mm MIG Gun Nozzle
Approximately 23/32" opening (18mm)
Base width 22mm
Interchanges with Trafimet® MC0024
Interchanges with Binzel® 145.0042
Fits Trafimet® ErgoPlus 25
Fits Binzel® MB25AK
Fits Everlast EV-25
20x66.5mm Spot Weld MIG Gun Nozzle
Opening of nozzle is approx. 13/16" (20mm)
Base width 22mm
Designed for direct contact spot welding
Raised stand-off tabs holds nozzle steady at correct height while making spot weld
Interchanges with Trafimet® MC0025
Interchanges with Binzel® 145...
Set of two Cylindrical Nozzles for SN-36, 36 series MIG Guns and PARKER Spool & Push Pull Guns.
20x84mm MIG Gun Nozzle
Approximately 3/4" opening
Base width 24mm
Interchanges with Trafimet® MC0028
Interchanges with Binzel® 145.0045
Fits Trafimet® ErgoPlus 36
Fits...
Set of two Conical Nozzles for SN-36, 36 series MIG Guns and PARKER Spool & Push Pull Guns.
17x84mm MIG Gun Nozzzle
Approximately 11/16" opening
Base width 24 mm (heavy)
Interchanges with Trafimet® MC0027
Fits Trafimet® ErgoPlus 36
Fits Binzel® MB36KD
Fits Everlast...
Nozzle Retaining Spring for MIG Gun
Interchanges with Trafimet® EA0303
Interchanges with Binzel® 002.0058
Fits Trafimet® ErgoPlus 15 with standard tip holder
Fits Binzel® MB15AK with standard tip holder
Fits Everlast EV-15
Nozzle Retaining Spring for MIG Gun
Interchanges with Trafimet® EA0304
Interchanges with Binzel® 002.0058
Fits Trafimet® ErgoPlus 25 with standard tip holder
Fits Binzel® MB25AK with standard tip holder
Fits Everlast EV-25
Set of two Contact Tips Holders for 15 series MIG Guns. Does not fit SN-15 MIG Guns
Brass Contact Tip Holder with Retaining Spring
Does not fit SN-15 MIG Guns
Fits 15 series MIG Guns only
Fits Trafimet® ErgoPlus 15
Fits Binzel® MB15AK
Interchanges with Trafimet®FB0117...
