Search results
Ceramic Cups with 1/2" bore (inside diameter)
Heat Resistant Alumina
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N46
5 Piece Kit
High Temp material resists cracking and thermal conductivity
Provides postive gas seal to prevent argon leakage around cup
Fits 9 and 20 series TIG torches
2 piece kit
18CG Cup Gaskets for TIG torches
High Temp material resists cracking and thermal conductivity
Provides positive gas seal to prevent argon leakage around cup
Fits all 17, 18 and 26 series TIG torches
Part Number: 18CG
2 Piece Kit
Long Back Cap (7" tungsten) for 17/18/26 series TIG torches
Part Number: 57Y02
1 piece
Short Back Cap for 17/18/26 series TIG torches
Part Number: 57Y04
1 piece
Long Back Cap (7" tungsten) for 9/20 series TIG torches
Part Number: 41V24
1 piece
Short Back Cap for 9/20 series TIG torches
Part Number: 41V33
1 piece
7 Pin Female style Plug for TIG Torch Switches.
7 Pin FEMALE Plug
2 Internal Pins for ON/OFF functionality
Panasonic® design
5/8" (nominal) diameter
Fits all EVERLAST units with 7 Pin MALE style connector on board
Does not fit MTS or MIG units with FEMALE style connectors...
Used on Argon and water fittings
Used with all Everlast quick connect fittings
Hose barb connection slips into most torch gas and argon fittings
Also used on other brand MIG water cooled guns
Used on Argon and water fittings
Used with all Everlast quick connect fittings
Hose barb connection slips into most torch gas and argon fittings
Also used on other brand MIG water cooled guns
3 Piece kit for water cooled torches or adding additional torches
Includes 6mm Stainless Steel...
Ground Clamp provides tight grip and strength at ground contact points.
Up to 300 Amps of service use
10 ft. cable with 35 Dinse connector (35-50mm / 35-70mm)
Measures 1/2" across connector end pin
Fits Everlast and other brand untis with 35 Dinse connector...
Ground Clamp provides tight grip and strength at ground contact points.
Up to 200 Amps of service use
10 ft. cable with 25 Dinse connector (10/25mm)
Measures 3/8" across connector end pin
Fits Everlast and other brand untis with 25 Dinse connector on board...
Stick Electrode Holder for Everlast units featuring stick welding capability.
Heavy Duty
Up to 300 Amps of service use
10 ft. cable with 35 Dinse Connector
Fits Everlast and other brand untis with 35 Dinse Connector on board
Stick Electrode Holder for Everlast units featuring stick welding capability.
Medium Duty Style up to 200 Amps of service use
10 ft. cable with 25 Dinse connector
Measures 3/8" across connector end pin
Fits Everlast and other brand untis with 25 Dinse connector ...
Set of Female and Male 9mm fittings
Female fitting replaces GAS OUTLET fitting on the front of the unit
Can be used to replace red or blue water connections on water coolers
Standard brass color
Hosebarb connection
Bronze Ground Clamp features a high-tensile spring for tight grip and provides superior strength at ground contact points. The 98% copper alloy minimizes resistance in electrical flow.
Heavy Duty style
Up to 300 amps of service use
Deluxe Copper Ground Clamp
Heavy Spring Action
10 ft...
Color Coded Red for easy ID
Intended for Hot water inflow into cooler
Hose barb connection (hose not included)
Male/Female set
Color coded blue for easy ID
Intended for cold water outflow from cooler
Hose barb connection
Male/Female
7 PIn Male style Plug for AMP Control Torches, Sliders and Foot Pedals.
7 Pin MALE Plug
7 Pins for full AMP control
3 Grooves design
9/16" (nominal) diameter
Fits all EVERLAST MTS and some MIG units with 7 Pin FEMALE style connector on board
Does not fit units with 7 Pin...
Converts existing 240V NEMA 6-50P to 120V NEMA 5-15P
For use with all Everlast Dual Voltage Welders and Plasma Cutters
Short adapter for easy stowability
This extension is designed to extend the length of the TIG torch water cooler lines when additional lengths are required when the water cooler is used on a cart of separate shelf. Color coded Red and Intended for "Input" side of cooler for hot water return from the torch.
3.5 ft. long...
This extension is designed to extend the length of the TIG torch water lines when additional lengths are required when the water cooler is used on a cart or serparate shelf. Color coded Blue and intended for "Output" side of cooler for cooled water supply to the torch.
3.5 ft. long...
Used to adapt Plasma torches to TIG/Stick/Plasma units
DINSE 35/50 (1/2")
If unsure measure diameter of DINSE connector before ordering.
For use with the following units:
PowerPro 164Si
PowerPro 205Si
PowerPro 256Si
PowerPro 256D
Used to adapt Plasma torches to TIG/Stick/Plasma units
DINSE 25 (3/8" approximate diameter)
If unsure measure diameter of DINSE connector before ordering.
For use with the following units:
SuperUltra 206Si
PowerUltra 206Pi
UltraArc 205
Plasma Torch Head Replacement Kit for S-45 Torches
Fits most PowerPlasma 50 and PowerPRO 164 and 205/PowerUltra 205 S-45 torches
Plasma Torch Head Replacement Kit for Trafimet S-75 Torches
Blowback Design
Part Number (Handle): TP0110
Part Number (Torch Head): PF0135
Plasma Torch Head Replacement Kit for P-80 Torches
OEM Replacement kit for P80 torches
High Frequency Torch with Pilot Arc
Shoulder striking design starts arc on shoulder
Offers increased cut capacity over older S-45
Innotech IPT-60
Central Connector
Fits the following units:
PowerPlasma 52i
PowerPlasma 62i
Recommended for older models:
PowerPlasma 50S...
New for 2015 and newer
Fits DINSE connector on PowerPro 205Si/256Si
Shoulder Striking design starts arc on shoulder
Innotech IPT-60
14 ft.
Check original torch to verify. Some newer 256S (up to 2015) uses S-75 torches
Fits the following units:
PowerPro 205Si...
Fits Trafimet® A101, 100 Amp HF start torch
Used on PowerPlasma units with A101 HF start torch
10 pc kit
Nozzle/Tip 1.4mm (EA101-PD0101)
