Search results
Set of two Contact Tips Holders for SN-24, 24 series MIG Guns and SM200N series Spool Guns.
M6 Thread
26mm long
Heavy Brass construction
Interchanges with Trafimet® MD0138-00
Interchanges with Binzel® 142.0003
Fits Trafimet® ErgoPlus 24
Fits Binzel® MB24KD
Fits ...
M6 thread, 37mm long
Standard Copper original style
Interchanges with Trafimet® ME0016
Interchanges with Binzel® 142.0001
Fits Trafimet® ErgoPlus 25
Fits Binzel® MB25AK
Fits Everlast EV-25
Set of two Contact Tip Holders for SN-36, 36 series MIG Guns and PARKER Spool & Push Pull Guns.
M6 thread
28mm long
Heavy Brass construction
Use with M6 thread tips only
Interchanges with Trafimet® MD0063-00
Interchanges with Binzel®142.0005
Fits Trafimet®...
7 Pin Female style Plug for AMP Control TIG Torches, Sliders and Foot Pedals.
7 Pin FEMALE Plug
7 Internal Pins for full AMP control
Panasonic® design
5/8" (nominal) diameter
Fits all EVERLAST units with 7 Pin MALE style connector on board
Does not fit MTS or MIG units...
MIG Contact Tip Kit 0.062" (1.6mm)
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (copper/chromium/zirconium)
10 piece kit
Set of two Gas Ceramic Diffusers for 24 series MIG Guns and SM200N series Spool Guns. May not fit SN-24 MIG Gun
Ceramic Heat resistant insulator
20mm long
Interchanges with Trafimet® ME0584
Interchanges with Binzel® 012.0017
Fits Trafimet® ErgoPlus 24
Fits Binzel® MB24KD...
Set of two Gas Ceramic Diffusers for SN-36, 36 series MIG Guns and PARKER Spool & Push Pull Guns.
Ceramic heat resistant insulator
32.8mm long
Interchanges with Trafimet® ME0517
Interchanges with Binzel® 014.0023
Fits Trafimet® ErgoPlus 36
Fits Binzel® MB36KD
Fits...
Blue Liner for steel (hard) wire
Coated steel
10 ft. / 3m long
Fits wire 0.6mm-0.9mm / .023"-.035"
Interchanges with Trafimet® GM0500
Interchanges with Binzel® 124.0011
P/N: IIC0500
Red Liner for steel (hard) wire
Coated steel
10 ft. / 3m long
Fits wire 0.9mm-1.2mm / .035"-.045"
Interchanges with Trafimet® GM0510
Interchanges with Binzel® 124.0011
P/N: IIC0560
Copper Contact Tip Kit 0.023" (0.6mm)
M5 thread
Heavy Duty design
Fits SM100N, SM3035N and SM3035N-MTS spool guns
5 Piece Kit
Part Number: M-199730
Copper Contact Tip Kit 0.030" (0.8mm)
M5 thread
Heavy Duty design
Fits SM100N, SM3035N and SM3035N-MTS spool guns
5 Piece Kit
Part Number: M-186419
Copper Contact Tip Kit 0.035" (0.9mm)
M5 thread
Heavy Duty design
Fits SM100N, SM3035N and SM3035N-MTS spool guns
5 Piece Kit
Part Number: M-186406
Replacement SM3035N Gas Diffuser Kit
Fits SM100N, SM3035N and SM3035N-MTS spool guns
2 Piece Kit
Part Number: M-186409
Replacement .562 orifice MIG Nozzle Kit
Fits SM100N, SM3035N and SM3035N-MTS spool guns
2 piece kit
Part Number: 186405
SM series Neck (barrel) replaceent for SM100N and SM303N Spool Guns
Replaces bent, damaged or burned nexks (barrels)
Neck (barrel) only
Drive Roll for Flux Core wire
.040"-.045" (1.0mm-1.2mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
Drive Rolls for Flux Core wire
.030"-.040" (0.8mm-1.0mm)
2 Piece Kit
For use with "4 roll" systems with 2 (double) drive rolls
NOT for units with external Wire Feeder
Collet Body 1/16" (1.6mm)
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N31
5 Piece Kit
Collet Body 3/32" (2.4mm)
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N32
5 Piece Kit
Collet Body 1/8" (3.2mm)
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N28
5 Piece Kit
5/16" bore (inside diameter)
Heat Resistant Alumina
Fits 9 and 20 series and many stubby conversion kits for 17/18/26 torches
Replaces 13N09
5 piece kit
3/8" bore (inside diameter)
Heat Resistant Alumina
Fits 9 and 20 series and many stubby conversion kits for 17/18/26 torches
Replaces 13N10
5 piece kit
7/16" bore (inside diameter)
Heat Resistant Alumina
Fits 9 and 20 series and many stubby conversion kits for 17/18/26 torches
Replaces 13N11
5 piece kit
1/2" bore (inside diameter)
Heat Resistant Alumina
Fits 9 and 20 series and many stubby conversion kits for 17/18/26 torches
Replaces 13N12
5 piece kit
1/4" bore (inside diameter)
Heat Resistant Alumina
Fits 9 and 20 series and many stubby conversion kits for 17/18/26 torches
Replaces 13N08
5 piece kit
Ceramic Cups with 1/4" bore (inside diameter)
Heat Resistant Alumina
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N50
5 Piece Kit
Ceramic Cups with 5/16" bore (inside diameter)
Heat Resistant Alumina
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N49
5 Piece Kit
Ceramic Cups with 3/8" bore (inside diameter)
Heat Resistant Alumina
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N48
5 Piece Kit
Ceramic Cups with 7/16" bore (inside diameter)
Heat Resistant Alumina
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N47
5 Piece Kit
Ceramic Cups with 1/2" bore (inside diameter)
Heat Resistant Alumina
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N46
5 Piece Kit
