Search results
This unit is the standard type 26 series TIG torch with rigid head and good choice for OEM replacement for Everlast Units. This size torch is the largest standard air-cooled torch size commonly available. Torch includes 2T/4T switch.
Keep in mind that this torch is...
Straight handle with flex neck design with 25 ft Ultra flex cable
Air-Cooled
Rated: 200 Amps DC / 150 Amps AC @ 60% Duty Cycle
Complete with standard 1/2" 35 series DINSE style connector
2T/4T remote contactor (finger switch) and quick disconnect gas fitting
Includes small...
The 18 series torches are the industry standard for welding on the higher Amperage end of welding jobs. The NOVA 18 series Rigid neck torches are rugged torches built for serious welding in mind. With industry standard 100% duty cycles for AC and DC for welding in the 250+ Amp...
Standard Handle, Flex Neck design
Water-cooled
Rated: 350 Amps DC, 250 Amps AC @ 100% Duty Cycle
Complete with 1/2" 35 series DINSE style connector
2T/4T remote switch included (finger switch on torch) and quick disconnect gas fitting
Includes small consumable starter pack
Good for...
Standard handle, flex neck design
Water-cooled
Rated: 350 Amps DC, 250 Amps AC @ 100% Duty Cycle
Complete with 1/2" 35 series DINSE style connector
2T/4T remote switch included (finger switch on torch) and quick disconnect gas fitting
Includes small consumable starter pack
Good for...
Standard handle, Flex design
Air-cooled
Rated 125 Amps DC, 80 Amps AC @ 60% Duty Cycle
Complete with 3/8" 25 Series DINSE style connector
2T/4T remote contactor (finger switch) and quick disconnect gas fitting
Includes small consumable starter pack. Contents may vary. ...
Standard handle, Flex Neck ( head) design
Air-cooled
Rated 125 Amps DC, 80 amps AC @ 60% Duty Cycle
Complete with 1/2" 35 Series DINSE style connector
2T/4T remote contactor (finger switch) and quick disconnect gas fitting
Includes small consumable starter pack. Contents may...
Standard handle, Flexible neck / head design
Air-cooled
Rated 125 Amps DC, 80 Amps AC @ 60% Duty Cycle
Complete with 1/2" 35 Series DINSE style connector
2T/4T remote contactor (finger switch) and quick disconnect gas fitting
Includes small consumable starter pack. Contents may...
Standard handle, Flex neck design
Air-cooled
Rated 150 Amps DC, 125 Amps AC @ 60% Duty Cycle
Complete with 2T/4T remote contactor
Comes with DINSE 35 style connector and quick disconnect for gas fitting
Fits most 200 Amp and up Everlast TIG capable welders as well as PowerTIG...
Standard handle, Flex neck design, Flex cable
Water-Cooled
Rated 250 Amps DC, 175 Amps AC @ 100% Duty Dycle
2T/4T remote contactor switch included
Complete with 1/2" 35 series DINSE style connector
Quick connects for gas and water lines for use with Everlast Coolers and some...
Standard handle, Flex neck design. Flex cable
Water-cooled
Rated 250 Amps DC, 175 Amps AC @ 100% Duty Cycle
2T/4T remote contactor switch included
Complete with 1/2" 35 series DINSE style connector
Quick connects for gas and water lines for use with Everlast Coolers and...
Euro handle with straight neck design, with 12.5 ft. cable
Features Amp control on handle with a rolling switch
Uses a separate 2T/4T contactor switch built into the handle to initiate the Arc and terminate the Arc
Air-cooled
Rated 200 Amps DC, 175 Amps AC @ 60% Duty Cycle...
Euro handle with straight neck design, with 12.5 ft. cable
Features Amp control on handle with a rolling switch
Uses a separate 2T/4T contactor switch built into the handle to initiate and terminate the Arc
Water-cooled
Rated 350 Amps DC, 250 Amps @ 100% Duty Cycle
Includes small...
Fits all Everlast Power i-MIG units with a Euro Quick connector
Best suited for Power i-MIG 140E, Cyclone 140E, Power i-MIG 200E, Cyclone 200E, Cyclone 212, Storm 215C
Rated at 180 Amp CO2 / 150 Amp mixed gases @ 60% duty cycle
Major torch parts and consumables are interchangeable with...
Fits all Everlast Power i-MIG units with Euro Quick connector
Best suited for Power i-MIG 230i and 253DPi
Rated at 250 Amp CO2 / 220 Amp mixed gases @ 60% Duty Cycle
Major torch parts and consumables interchange with Binzel® MB24KD and Trafimet® ErgoPlus 24
10 ft. / 3 m long...
Fits all Everlast Power i-MIG units with a Euro Quick connector
Best suited for Power i-MIG 230i and i-MIG 253DPi
Rated at 250 Amp CO2 / 220 Amp mixed gases @ 60% Duty Cycle
Major torch parts and consumables interchange with Binzel® MB24KD Trafimet® ErgoPlus 24
15 ft / 5 m long cable
SM100N Spool Gun is designed to fit Cyclone 140E and 200ES units with Euro-style Connector. Can be used with older Power i-MIG 140E and 200E welders.
Rated for 135A with 35% Duty Cycle, which is comparable to other guns this size.
Serrated drive roll feeds 40XX and 50XX...
SM3035N Spool Gun designed for Cyclone 200ES
Speed control is controlled on the welder and not on the spool gun. Must be limited to 200 amps or less use.
180A with 60% Duty Cycle
Serrated drive roll feeds 40XX and 50XX series aluminum wire.
Can be used to feed...
The torch is designed for SuperCut 50P, and older PowerPlasma 60 units units with a HF start and Pilot Arc. Also used with older model PowerPro/Master 256/226, PowerUltra 205/205P with HF start and Pilot arc and DINSE style connector. Connects to old DINSE connector. If new connector is needed,...
Fits older model PowerPlasma 60 with HF start and Pilot arc with central connector.
Fits older model PowerPlasma 60 with HF start and Pilot arc with central connector/
The torch is designed for use with older Everlast high frequency 50/60 Amp units with larger metric connection.
Designed to fit Older PowerPlasma 60,70, 80 units with Euro style "central" quick connect and HF Start and pilot arc. Economical replacement for Trafimet A-81. Note: Consumables do not interchange with A-81.
Designed to fit Older PowerPlasma 60,70, 80 units with Euro style "central" quick connect and HF Start and pilot arc. Economical replacement for Trafimet A-81. Note: Consumables do not interchange with A-81.
Designed to fit older PowerPlasma 60, 70, and 80 plasma cutters HF Start and fitted with a Central Connector.
This genuine Trafimet® torch is designed to fit older PowerPlasma 60,70, and 80 units with HF start. Metric threaded compression connection. Also designed to fit older model PowerPro 256 and 226 units with HF start and Pilot arc. Reuses existing DINSE connector. Extended...
This genuine Trafimet® torch is designed to fit older PowerPlasma 60,70, and 80 units with HF start and fitted with Central connector. Extended cable length (25ft)
Genuine Trafimet® torch design with blow back start with pilot arc is designed for use with With PowerPro S series units. May replace S-45 torches originally equipped on PowerPro 164 and later model PowerUltra models. Must reuse existing DINSE connector. Threaded connection.
Genuine Trafimet® S-75 with blow back start and pilot arc. Fits all 60S, 70S, 80S PowerPlasma units with central connector. Also can be used as upgrade replacement for PowerPlasma 50 with blowback start and central connector.
Genuine Trafimet® torch design with blow back start with pilot arc is designed for use with With PowerPro S series units. May replace S-45 torches originally equipped on PowerPro 164 and later model PowerUltra models. Must reuse existing DINSE connector. Threaded connection. ...
