Accessories and Equipment

A good option to have

TIG welders should always have a backup torch. In the world of TIG welding, there is no such thing as a “one size fits all” approach when... more

MIG guns to fit Everlast Welders

Everlast MIG guns are high quality MIG torches that offer the best in performance and ergonomic design. They are based off a common design popularized by... more

Using a Spool gun with your Everlast MIG or MTS welder

Spool guns are economical alternatives for welding aluminum or stainless steels greater than 1/8” in thickness. Thinner thicknesses... more

Selecting your replacement regulator for TIG and MIG

Everlast offers a complete line of regulators and inline air dryers/filters. Everlast gas regulators can be used with any TIG or MIG.... more

Selecting Everlast Plasma torches

If you are looking for a plasma torch replacement for your Everlast PowerPlasma or SuperCut plasma cutter, be sure to select the plasma cutting torch... more

The full range of Everlast foot pedals

Everlast TIG welder foot pedals are designed to work with Everlast foot pedals and are unique in connection and ohm value of the potentiometer. They... more

Operations
PowerCart 250
Need To Know:
  • 3 tiers of shelves
  • Top shelf angled for easy access and viewing of welder control panel
  • Cable and hose hangers mounted on the side
  • Rear deck accomodates full size gas cylinders, includes adjustable safety chain restraint
  • Easy to push/pull around shop with front pivoting casters.
  • Fits most Everlast welders, plasma cutters and water coolers
  • Not designed for use with PowerPlasma 100 and PowerTIG 315LX
Input
Output
$129.00 Buy Now FINANCE
PowerCart 300
Need To Know:
  • Low profile designed especially for large frame unit such as PowerTIG 315LX, PowerTIG 350EXT, PowerMTS 252STi
  • Low center of gravity
  • Holds "nested" units with water cooler
  • Rear deck accomodates full size gas cylinders, includes adjustable safety chain restraint
  • Easy to push/pull around shop with front pivoting casters.
  • Not designed for use with smaller welders.
  • Some adjustment may be required upon assembly depedning on model being used with the cart.
Input
Output
$249.00 Buy Now FINANCE
250 A MD Electrode holder DINSE 25
Need To Know:
  • <250A max medium service use
  • 10ft cable
  • Small Style DINSE connector
  • Medium Duty tong style design
  • Fits Smaller TIG/Stick welders only with DINSE 25 connector that measures 3/8" across connector pin
Input
Output
$39.00 Buy Now FINANCE
300A HD Stick Electrode Holder 10ft/ DINSE 50
Need To Know:
  • 300 A max service use
  • 10 ft cable
  • Large style DINSE connector
  • Heavy Duty Tong Style design
Input
Output
$49.00 Buy Now FINANCE
SM100N Spool gun with 10 ft cable
Need To Know:
  • 135 Amps @ 35% Duty Cycle
  • Euro Style quick connect
  • Roll diameter max: 4"
  • .023"-.035" diameter wire
  • 10 ft cable
  • Recommended for Power i-MIG 140E and 200E only
  • Great for Hobbyist, light repair work
Input
Output
$189.00 Buy Now FINANCE
200A Work Clamp with 10 ft Cable/DINSE 25
Need To Know:
  • <200 A max service use
  • 10 ft cable
  • Small style DINSE connector
  • Medium Duty
Input
Output
$35.00 Buy Now FINANCE
300A Work Clamp with 10 ft Cable/DINSE 50
Need To Know:
  • 300 A max service use
  • 10 ft cable
  • Large style DINSE connector
  • Medium Duty
Input
Output
$35.00 Buy Now FINANCE
EV 15 MIG Gun with quick connect, 3m cable
Need To Know:
  • 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle
  • Air cooled with 3m long cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design, easily adjusts stick out of electrode
  • Sold as a replacement gun for Power i-MIG 140E and 200
Input
Output
$149.00 Buy Now FINANCE
SM3035N Spool gun with 20 ft cable
Need To Know:
  • 180 Amps @ 60% Duty Cycle
  • Euro style quick connect
  • Roll diameter max: 4"
  • .030"-.035" diameter wire
  • Recommended for Power i-MIG 200, 205,210, 205P, 250 and 250P
  • Not for Power i-MIG 230i, 275S, 275P
  • Not for PowerMTS units
  • Good for General repair, fabrication, hobby work

 

Input
Output
$299.00 Buy Now FINANCE
EV-PowerPedal-22E Economy Foot Pedal 22k Ω
Need To Know:
  • 22k Ω with potentiometer knob on pedal
  • Designed to work with most units with out maximum amp control on panel when the foot pedal is plugged in
  • Comes with 13ft cord and 7 pin connector
Input
Output
$89.00 Buy Now FINANCE
SM3035-MTS Spool Gun with 20 ft cable
Need To Know:
  • 180 Amps @ 60% Duty Cycle
  • Euro style quick connect
  • Roll diameter max: 4"
  • .030"-.035" diameter wire
  • Good for General repair, fabrication, hobby work
  • For use with MTS 200 analog.
  • Not for use with Power i-MIG 140E, 200, 205, 205P, 250, 250P
  • Uses speed control in handle
Input
Output
$319.00 Buy Now FINANCE
EV 15 MIG gun with quick connect, 5m cable
Need To Know:
  • 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle
  • Air cooled with 5m long cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design, easily adjusts stick out of electrode
  • Sold as a replacement gun for Power i-MIG 140E and 200

 

Input
Output
$159.00 Buy Now FINANCE
350A HD Work Clamp with 10 ft Cable/DINSE 50
Need To Know:
  • Deluxe Cast Bronze construction
  • Heavy Spring Action
  • 10 ft Heavy Duty cable
  • Large style DINSE 50 Connector
  • OEM Replacement for PowerTIG 210/255/325EXT
Input
Output
$59.00 Buy Now FINANCE
EV 100E Economy Ar/Mix Gas Flow Meter
Need To Know:
  • Floating ball type
  • Reads in Liters per minute (metric calibrated)
  • Economy model, fits older Everlast units with hose barb connections
Input
Output
$45.00 Buy Now FINANCE
SM200N Spool Gun with 20 ft. cable
Need To Know:
  • 200 Amps @ 35% Duty Cycle
  • .030"-.045" wire diameter
  • Roll diameter max: 4"
  • Binzel/Trafimet 24 series consumables
  • Recommended for use with Power i-MIG 140E, 200, 205, 205P, 210, 250, 250P
  • Not for use with PowerMTS models or Power i-MIG 230i, Power i-MIG 275S, Power i-MIG 275P
  • Good for hobby, general repair and fabrication, farm, ranch and light production work
Input
Output
$399.00 Buy Now FINANCE
EV-PowerPedal 47E Economy Pedal 47k Ω
Need To Know:
  • 47kΩ
  • Designed to work with most TIG and multi units with amp limiting ability on the panel with the pedal plugged in
  • Comes with 13 ft. cord, and  7 pin connector
  • Economy
Input
Output
$89.00 Buy Now FINANCE
120 to 240V adapter
Need To Know:
  • NEMA 6-50P to NEMA 5-15R Adapter
  • Steps down standard 240V plug to 120V operation.
  • Also referred to as "Pig tail" adapter
Input
Output
$45.00 Buy Now FINANCE
EV 25 MIG Gun with quick connect, 3m cable
Need To Know:
  • 230A CO2/200A Mixed CO2/Ar @ 60% Duty Cycle
  • Air cooled with 3m long cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design, easily adjusts stick out of electrode
  • Sold as a replacement gun for Power i-MIG 200E, 205, 205P and PowerMTS 200

 

Input
Output
$169.00 Buy Now FINANCE
EV 25 MIG gun with quick connect, 5m cable
Need To Know:
  • 230A CO2/200A Mixed CO2/Ar @ 60% Duty Cycle
  • Air cooled with 5m long cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design, easily adjusts stick out of electrode
  • Sold as a replacement gun for Power i-MIG 200E, 205, 205P and PowerMTS 200

 

Input
Output
$185.00 Buy Now FINANCE
EV-PowerPedal-22DL- Deluxe Foot Pedal 22k Ω
Need To Know:
  • 22kΩ pedal with built-in amp limiting knob
  • Low profile with compact size
  • Fits most Pre 2013/14 welders without amp limiting control on panel
  • Comes with 13 ft cord and 7 pin connector.
Input
Output
$119.00 Buy Now FINANCE
EV 200UW Standard Ar/Mix gas Flow meter CFH
Need To Know:
  • Standard OEM model for current units
  • Calibrated in CFH
  • Floating ball type
  • Heavy, Brass construction
  • For: Ar and AR/CO2 and mix gas
Input
Output
$69.00 Buy Now FINANCE
EV-PowerPedal 50DL- Deluxe Foot Pedal 50k Ω
Need To Know:
  • 50k Ω (Fits 50k and 47k Ω)
  • Low profile with compact size
  • Fits most Everlast welders with Maximum amp control capability on the panel
  • Good choice for digitally controlled Everlast units
  • Offers precise control of amps
  • Comes with 13 ft. cord and 7 pin connnector for TIG
Input
Output
$119.00 Buy Now FINANCE
EV-PowerPedal-MTS Deluxe Foot Pedal 47k Ω
Need To Know:
  • Fits digital MTS 200 and 250S only
  • Comes with 13 ft cord and small pin connector for MTS
  • Does not fit MTS 160 or 200S
  • 47k/50k Ω
Input
Output
$119.00 Buy Now FINANCE
AF2000- TYPE A Plasma Filter/Water Trap
Need To Know:
  • Fits older model plasma cutters with regulator knob and pressure gauge mounted on front panel
  • Fits current PowerPlasma 50
  • Mounting bracket not included
  • Not for use with PowerPlasma 60, 70, and 80 units manufactured in 2013 and up.
  • Not to be used without separate air drying system
Input
Output
$39.00 Buy Now FINANCE
EV 24 MIG gun with quick connect, 3m cable
Need To Know:
  • 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
  • Air cooled with 3m cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design, easily adjusts stick out of electrode
  • Sold as a replacement gun for Power i-MIG 250, 250P and PowerMTS 250S

 

Input
Output
$185.00 Buy Now FINANCE
NOVA-Foot Pedal with anti-slip grip MTS type 22k Ω
Need To Know:
  • High Quality Import replaces SSC
  • Designed for all new PowerMTS units with 22k pedals
  • New! From Nova Welding Industries
  • 2 Million Cycle Japanese made Potentiometer improved over 1 million cycle of SSC
  • Improved Strain relief on cable
  • Designed for all units with 22K Ω pedals
  • Excellent choice for upgrade or replacement
  • Lowest profile, compact size.
  • Offers most precise control of amps
  • Fitted with 7 pin connector for TIG
  • 25 ft. length
Input
Output
$159.00 Buy Now FINANCE
NOVA-Foot Pedal with anti-slip grip 50k Ω
Need To Know:
  • High Quality Import replaces SSC
  • New! From Nova Welding Industries
  • 2 Million Cycle Japanese made Potentiometer improved over 1 million cycle of SSC
  • Improved Strain relief on cable
  • Designed for all units with 47k Ω or 50 Ω pedals
  • Excellent choice for upgrade or replacement
  • Lowest profile, compact size.
  • Offers most precise control of amps
  • Fitted with 7 pin connector for TIG
  • 25 ft. length
Input
Output
$159.00 Buy Now FINANCE
EV 24 MIG gun with quick connect, 5m cable
Need To Know:
  • 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
  • Air cooled with 5m cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design, easily adjusts stick out of electrode
  • Sold as a replacement gun for Power i-MIG 250, 250P and PowerMTS 250S

 

Input
Output
$199.00 Buy Now FINANCE
NOVA-Foot Pedal with anti-slip grip 22k Ω
Need To Know:
  • High Quality Import replaces SSC
  • New! From Nova Welding Industries
  • 2 Million Cycle Japanese made Potentiometer improved over 1 million cycle of SSC
  • Improved Strain relief on cable
  • Designed for all units with 22K Ω or 50K Ω pedals
  • Excellent choice for upgrade or replacement
  • Lowest profile, compact size.
  • Offers most precise control of amps
  • Fitted with 7 pin connector for TIG
  • 25 ft. length
Input
Output
$159.00 Buy Now FINANCE
SM200N-MTS Spool Gun with 20 ft. cable
Need To Know:
  • 200 Amps @ 35% Duty Cycle
  • .030"-.045" wire diameter
  • Roll diameter max: 4"
  • Binzel/Trafimet 24 series consumables
  • Recommended for use with PowerMTS 211Si and 251Si
  • Recommended for use with PowerMTS 221STi
  • Recommended for use with PowerMTS 200 and 250S with small pin connector
  • Not for use with PowerMTS 160, 200S or 400.
  • Not for use with Power i-MIG 140E, 200, 205, 205P, 210, 250, 250P
  • Good for hobby, general repair and fabrication, farm, ranch and light production work.
  • Uses speed control located in handle.

 

Input
Output
$399.00 Buy Now FINANCE
AW2000-TYPE B Plasma Regulator/Filter/Water Trap
Need To Know:
  • Fits 2013 and up PowerPlasma 60S/70S/80S and Supercut series
  • Fits almost all PowerPro/PowerUltra/ SuperUltra series units
  • Adjusts air pressure and traps water/particulates
  • Mounting bracket not included
  • Not considered a dryer
  • Not to be used without separate air drying system.
Input
Output
$49.00 Buy Now FINANCE
EV 36 MIG gun with quick connect, 5m cable
Need To Know:
  • 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
  • Air-cooled, heavy duty gun, 5m cable
  • Ergonomic, well made design
  • Euro quick connect compatable with ESAB® MIG welders and others
  • Contact Tip interchangeable with TWECO® and Lincoln®
  • Twist off, slide on design of nozzle easily adjusts stick out
  • Sold as a heavy duty upgrade gun for Power i-MIG 250, 250P and PowerMTS 250S for axial spray

 

Input
Output
$209.00 Buy Now FINANCE
Parker DSP 360 Spool Gun with 20 ft. Cable
Need To Know:
  • 300 Amps CO2/ 270 Amps Mixed @ 60% Duty Cycle
  • .030"-.045" wire diameter drive rolls available
  • Roll diameter max: 4"
  • Binzel/Trafimet 36 series consumables
  • Recommended for use with Power i-MIG 230i, 275S, 275P and PowerMTS 251Si, 252STi
  • Not for use with Power i-MIG 140E, 200, 210
  • Good for hobby, general repair and fabrication, farm, ranch and heavy production work.
  • Uses speed control located in handle
  • Long life motor
  • 20 ft.
Input
Output
$599.00 Buy Now FINANCE