Designed to fit PowerMTS 400 wire feeder. 36 series gun has euro quick connect and 4m length cable. Good selection for heavy duty use with the Power i-MIG 250, 250P and MTS250S. Tolerates heat generated with higher amp welding and axial spray mode. Std liner up to .045". Air cooled torch operates at a substantial 60% duty cycle at 340 amps with straight CO2 and up to 320 amps with Mixed Ar/CO2 gas. 5m long cable. Main head and consumables interchange with Binzel® MB36KD and Trafimet® Ergo Plus 36.. Can be used with either .6 or .8 mm contact tip if contact tip holder is changed. Note: Standard gun is equipped with .8mm contact tips. Specify replacement tip size when ordering consumables. Must order new tip holder when using .6mm contact tips.