Stick Welding Fundamental Guidelines:

1. The correct electrode for the work: several people are not sure of the size of the electrode they must use and this is significant to know. The size of the electrode will depend on the circumstances you are welding in. In this condition you will be fighting against gravity if you are doing the weld up and down so you will desire to use an electrode that is AWS classified as 7018 since they are low in their powder content.

2. A weld shelf creates a excellent guide: if you are doing vertical or horizontal welding you will require something to the electrode be able to follow so you do not loose any of it to gravity. You know how to do this by creating a grave of small shelves so you are capable of do a part at a time so that you are able to carry on to work over a weld that you contain previously laid. This will make a condition where one puddle will freeze in time to hold the next weld.

3. Do not weaken if likely: this is able to occur since you contain to weave the electrode and sometimes your work may be gouged and not have sufficient fill metal. When this happens you will be functioning against gravity since it will work to pull your fill metal left from the space you are working. You can decrease your puddle size to assist you have additional control in this circumstances.

4. Stay left as of weird sizes for your metal: many metal will come in exact sizes that are forever ordinary. These metals will be easier to find and you can weld them fester. Stick welding with the ones that are AISI-SAE 1015 to 1025 as a result that you know how to be sure that you contain what you need.

5. Make certain you be familiar with your arc length: a good regulation of thumb is to use an arc length that is the similar distance from the metal as your electrode's thickness. As an example, if you have an electrode that is ¼" thick, after that have your arc ¼" thick. Also keep in mind that as you use the electrode, you will contain to move it nearer to the metal.