Parker DSP 360 Spool Gun

The new Parker DSP 360 Spool Gun is capable of 300 amps of welding power.  This unit is heavy duty and designed to go the distance.  The 36 series consumables will interchange with Everlast units that are equipped with 36 series MIG guns.  (Note units that are not equipped with the 36 series MIG gun as the standard main gun, can also be upgraded with 36 series main gun as an option if matching consumables are desired).  This gun is a pistol grip style with Euro style connector and amp controlled from the handle. Not for use with PowerMTS 400 or not listed MIG models. Comes with .040" U-Groove Drive Roll.

• 300A CO2
• 270A Mixed Gas
• 35% Duty Cycle
• Drive Roll U-Groove (AL) .040"
• Wire Size (AL): .030"-.045" (0.8-1.2)
• Wire Size (Steel): .030"-.040" (0.8-1.0)
• Roll diameter max: 4"
• 1000 Hours of motor life
• 25 ft. cable with Euro style Connector
• NOT for use with not listed MIG and MTS models
• Good for hobby, general repair and fabrication, farm, ranch and heavy production work
• Uses speed control located in handle

Recommended for current models:

• Cyclone 262i
• Cyclone 263Pi
• Cyclone 273DPi
• Cyclone 312i
• Cyclone 313Pi
• Cyclone 373DPi
• Lightning MTS 225
• Lightning MTS 275
• Tempest 412i

Specify replacement contact tip size when ordering consumables.

Note: Spool Gun is equipped with M8 contact tip holder.  To use M6 contact tips please order M6 Contact Tip Holder