Search results
Shielding Cup for PowerPlasma 150H plasma cutters with LT-151 torches.
For Innotec® LT-151 and LTM-151 torches only
Tough, melt resistant material
Replaces part numbers PC0120 and IVS0670
To be used with standard length electrodes and nozzles/tips only
Air Cooling Tube Replacement for IPT/PTM-100 Plasma Torches.
1.575 inches / 39.99mm long
Replaces part numbers IZN0774 and 09700.48
240V Motor (Pump) Replacement for PowerCool W300, PowerCool W375 and PowerCool W400.
220V-240V
Fan included
Made in ITALY
For PowerCool W300, PowerCool W375 and PowerCool W400 only
Manufacturer warranty: 24 months
120V Motor (Pump) Replacement for PowerCool W350
110V-120V
Fan included
Made in ITALY
For PowerCool W350 only
Manufacturer warranty: 24 months
Drive Rolls for RedSabre Laser Units and Laser Wire Feeders
Type: V Groove
Size: .045"-.062" (1.2mm-1.6mm)
Wire: Hard Wire
Set of 2 Drive Rolls
For all RedSabre Units and their Single and Dual Wire Feeders
Drive Rolls for RedSabre Laser Units and Laser Wire Feeders
Type: V Groove
Size: .035"-.045" (0.9mm-1.2mm)
Wire: Hard Wire
Set of 2 Drive Rolls
For all RedSabre Units and their Single and Dual Wire Feeders
Drive Rolls for RedSabre Laser Units and Laser Wire Feeders
Type: V Groove
Size: .030"-.035" (0.8mm-0.9mm)
Wire: Hard Wire
Set of 2 Drive Rolls
For all RedSabre Units and their Single and Dual Wire Feeders
Drive Rolls for RedSabre Laser Units and Laser Wire Feeders
Type: U Groove
Size: .035"-.045" (0.9mm-1.2mm)
Wire: Aluminum Wire
Set of 2 Drive Rolls
For all RedSabre Units and their Single and Dual Wire Feeders
Drive Rolls for RedSabre Laser Units and Laser Wire Feeders
Type: U Groove
Size: .045"-.062" (1.2mm-1.6mm)
Wire: Aluminum Wire
Set of 2 Drive Rolls
For all RedSabre Units and their Single and Dual Wire Feeders
The new Typhoon 330 is a powerful member of the all new generation of TIG welders from Everlast. The Typhoon family has a long list of next-level features. These features goes far beyond most all other TIG welders on the market. As the top tier line of welders in Everlast's...
IPT-40 Hand Held Plasma Torch
Shoulder Striking design starts arc on shoulder
35 Dinse Connector
14 ft.
Fits new Storm 215C
The Cyclone 312i is a powerful and compact roll-around MIG. A common requested item for this welder though is a spool gun. Everlast has created this special Parker DSP 360 Spool Gun package to increase it's versatility and reach while welding aluminum. This package includes the...
Set of two Gas Ceramic Diffusers for SN-24 MIG Guns. May not fit 24 series MIG Guns
Ceramic Heat resistant insulator
20mm long
Fits Everlast SN-24 MIG Guns only. May not fit 24 series MIG Guns
P/N: 16608003
MIG Contact Tip Kit 0.062" (1.6mm)
Properly oversized for Aluminum wire
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (...
MIG Contact Tip Kit 0.035" (0.9mm)
Properly oversized for Aluminum wire
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (...
MIG Contact Tip Kit 0.045" (1.2mm)
Properly oversized for Aluminum wire
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (...
MIG Contact Tip Kit 0.030" (0.8mm)
Properly oversized for Aluminum wire
M6 thread
For SN-24, 24 and 25 series MIG Guns
For SM200N Spool Guns
Fits SN-36 and 36 series MIG Guns with M6 Contact Tip Holder only
Heavy-Duty design
Cu-Cr-Zr (...
D16T5 F50 Collimating Lens for Air-Cooled Laser Guns.
Lens only
Gun Type: Air-Cooled only
Model: D16T5 F50
Material: Quartz
Application: collimating
D16T5 F50 Collimating Lens for Water-Cooled Laser Guns.
Lens only
Gun Type: Water-Cooled only
Model: D16T5 F60
Material: Quartz
Application: collimating
5 x IPT-100 Electrodes
1 x IPT-100 Shielding Cup
1 x IPT-100 1.1mm Nozzle/Tip (50-60A)
1 x IPT-100 1.2mm Nozzle/Tip (60-70A)
1 x IPT-100 1.3mm Nozzle/Tip (70-80A)
1 x IPT-100 1.4mm Nozzle/Tip (80-90A)
1 x IPT-100 1.5mm Nozzle/Tip (100-110A...
15 x IPT-100 Electrodes
2 x IPT-100 1.0mm Nozzle/Tip (40-50A)
2 x IPT-100 1.1mm Nozzle/Tip (50-60A)
2 x IPT-100 1.2mm Nozzle/Tip (60-70A)
3 x IPT-100 1.3mm Nozzle/Tip (70-80A)
3 x IPT-100 1.4mm Nozzle/Tip (80-90A)
3 x IPT-100 1.5mm Nozzle...
15 x IPT-100 Electrodes
2 x IPT-100 Shielding Cup
2 x IPT-100 1.0mm Nozzle/Tip (40-50A)
2 x IPT-100 1.1mm Nozzle/Tip (50-60A)
2 x IPT-100 1.2mm Nozzle/Tip (60-70A)
3 x IPT-100 1.3mm Nozzle/Tip (70-80A)
3 x IPT-100 1.4mm Nozzle/Tip (80-90A)
3...
35 x IPT-100 Electrodes
5 x IPT-100 Shielding Cups
5 x IPT-100 1.0mm Nozzle/Tip (40-50A)
6 x IPT-100 1.1mm Nozzle/Tip (50-60A)
6 x IPT-100 1.2mm Nozzle/Tip (60-70A)
6 x IPT-100 1.3mm Nozzle/Tip (70-80A)
6 x IPT-100 1.4mm Nozzle/Tip (80-90A)...
Cyclo-Air S750 compact welding fume extractor is designed with a triple-filtered air filtration system that can filter particles from the air down to .5µm with up to 95% filtration action. The three filters are progressive in nature and reduce particle sizes as they go to help...
The Fab-Rite Professional Welding Station is a ideal solution to meeting your work station needs. This welding work station is designed to fit almost any welding environment where at-station fabrication or production is required. The rolling-caster design and pop-up nature of the...
Set of two adapters to convert PowerCool W350 connectors from Miller to Everlast style.
Threaded to Quick Connect style conversion
Designed to fit Everlast TIG torches
2 pieces kit
Laser technology is rapidly evolving. The technology has moved away from old large CO2 systems with costs ranging into the hundreds of thousands of dollars to small, more portable fiber lasers that can be operated with hand held equipment with price tags below ten thousand dollars....
If you need the most power the PowerTIG 400EXT is the latest and most powerful member of Everlast's PowerTIG series of TIG/Stick welders. With 35% duty cycle at 400, there's enough power to weld most every TIG welding chore found in most any shop and do it without stopping every minute...
The Everlast RedSabre line of Laser systems now includes Laser Cleaners. Laser cleaning is the future of surface prep and renewal for all types of surfaces including metal. Laser cleaning is a fast, simple and environmentally friendlier solution to the other forms of...
