Search results
Tip/Nozzle Kit for 2015 and up PowerPlasma 50S/60S/52i/62i plasma cutters and PowerPro 205Si/256Si with IPT-60 torches.
30-40 Amps
For Innotec® IPT-60 torches
Patented back-striking design
Standard type with 0.9 mm orifice
Replaces part numbers 51313P.09 and IVU1660-09...
Tip/Nozzle Kit for 2015 and up PowerPlasma 50S/60S/52i/62i plasma cutters and PowerPro 205Si/256Si with IPT-60 torches.
40-50 Amps
For Innotec® IPT-60 torches
Patented back-striking design
Standard type with 1.0 mm orifice
Replaces part numbers 51313P.10 and IVU1660-10
For...
40-50A
Consumable Kit for 2015 and up PowerPlasma 100S/102i plasma cutters
15 x Electrodes
15 x 1.0 mm Nozzles/Tips
2 x Shielding Cups
For Innotec® IPT-100 torches
50-60A
Consumable Kit for 2015 and up PowerPlasma 100S/102i plasma cutters
15 x Electrodes
15 x 1.1 mm Nozzles/Tips
2 x Shielding Cups
For Innotec® IPT-100 torches
50A
Nozzle/Tip Kit for older PowerPlasma S-series and PowerPro 256S
Part Number: PD0114-10
10 x 1.0 mm Nozzles/Tips
For Trafimet® S-75 torches
Copper Contact Tip Kit 0.045" (1.2mm)
M5 thread
Heavy Duty design
Fits SM100N, SM3035N and SM3035N-MTS spool guns
5 Piece Kit
Part Number: M-186406
MIG Contact Tip Kit 0.062" (1.6mm)
M6 thread
For SN-15 and 15 series MIG Guns
Light-Duty design
E-CU (copper)
10 piece kit
Small-to-Large DINSE Adapter
Converts DINSE 25 (3/8" approximate diameter) to DINSE 35 (1/2" approximate diameter)
If unsure measure diameter of DINSE connector before ordering
Large-to-Small DINSE Adapter
Converts DINSE 35/50 (1/2" approximate diameter) to DINSE 25 (3/8" approximate diameter)
If unsure measure diameter of DINSE connector before ordering
2 Piece Kit for AW2000-02 Air Filter / Water Trap
Blocks air on one of the sockets
Fully Adjustable Clamps
2 Pieces Included
Compatible with PowerPlasma 50S / 60S / 80S
Holds Air Filters and Other Accessories
Fits PowerCool W400 Water Cooler
Drive Roll for Hard (steel) wire
.040"-.045" (1.0mm-1.2mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
Drive Roll for Hard (steel) wire
.035"-.040" (0.9mm-1.0mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
Drive Roll for Hard (steel) wire
.030"-.040" (0.8mm-1.0mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
Drive Roll for Hard (steel) wire
.030"-.035" (0.8mm-0.9mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
Drive Rolls for Hard (steel) wire
.030"-.035" (0.8mm-0.9mm)
2 Piece Kit
For use with "4 roll" systems with 2 (double) drive rolls
NOT for units with external Wire Feeder
Drive Rolls for Hard (steel) wire
.030"-.040" (0.8mm-1.0mm)
2 Piece Kit
For use with "4 roll" systems with 2 (double) drive rolls
NOT for units with external Wire Feeder
Drive Rolls for Hard (steel) wire
.040"-.045" (1.0mm-1.2mm)
2 Piece Kit
For use with "4 roll" systems with 2 (double) drive rolls
NOT for units with external Wire Feeder
Drive Rolls for Flux Core wire
.040"-.045" (1.0mm-1.2mm)
2 Piece Kit
For use with "4 roll" systems with 2 (double) drive rolls
NOT for units with external Wire Feeder
Drive Rolls for Flux Core wire
.030"-.035" (0.8mm-0.9mm)
2 Piece Kit
For use with "4 roll" systems with 2 (double) drive rolls
NOT for units with external Wire Feeder
Drive Roll for Flux Core wire
.030"-.035" (0.8mm-0.9mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
Drive Roll for Flux Core wire
.030"-.040" (0.8mm-1.0mm)
1 Piece Kit
For use with "2 roll" systems with one (single) drive roll
NOT for units with external Wire Feeder
NOTE: THIS NOVA KIT CANNOT BE PURCHASED SEPARATELY! It must be purchased as...
NOTE: THIS NOVA KIT CANNOT BE PURCHASED SEPARATELY! It must be purchased as...
Collet .040" (1.0mm)
Fits 9 and 20 series TIG torches
Part Number: 13N21
5 Piece Kit
Collet Body 0.040" (1.0mm)
Fits all 9 and 20 series TIG torches
Part Number: 13N26
5 Piece Kit
Collet 0.040" (1.0mm)
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N22
5 Piece Kit
Collet Body 0.040" (1.0mm)
Fits all 17, 18 and 26 series TIG torches
Part Number: 10N30
5 Piece Kit
If you are wanting more power, unquestionable cut quality, and reliabilty in a plasma cutter, but you just can't justify spending your green for something that is gray, the PowerPlasma 62i is the answer. As the all new replacement for the ever popular PowerPlasma 60S, the...
The PowerPlasma 82i is really a plasma cutter in a class by itself. When you consider the performance capability of the machine, design features and the price of the unit together, there really is nothing to compare it to. Sure there are a couple of 80-90 Amp plasma cutters on the...
