Plasma Cutting Torches

Operations
PT 60 50/60A 14 ft. Blowback Start/Central
Need To Know:
  • Fits 2015 and newer Power Plasma 50S/60S with Central connector
  • Back Striking design starts arc on shoulder
  • Offers increased cut capacity over older S-45
  • Tecmo/Innotech PT60/iPT60
  • Central Connector
 

 

 

 
Input
Output
$369.00 Buy Now FINANCE
PT 60 50/60A 24 ft. Blowback Start/Central
Need To Know:
  • Fits 2015 and newer Power Plasma 50S/60S with Central connector
  • Back Striking design starts arc on shoulder
  • Offers increased cut capacity over older S-45
  • Tecmo/Innotech PT60/iPT60
  • Central Connector
  • 24 ft.

Input
Output
$399.00 Buy Now FINANCE
PT 60 50/60A 14ft. Blow Back Start/ Threaded
Need To Know:
  • New for 2015 and newer
  • Fits DINSE connector on PowerPro 205S/256S
  • Back Striking design starts arc on shoulder
  • Tecmo/Innotech PT60/iPT60
  • Check original torch to verify.  Some newer 256S use S75 up to 2015

 

 

 
Input
Output
$359.00 Buy Now FINANCE
PT 60 50/60A 24ft. Blow Back Start/ Threaded
Need To Know:
  • New for 2015 and newer
  • Fits DINSE connector on PowerPro 205S/256S
  • Back Striking design starts arc on shoulder
  • Tecmo/Innotech PT60/iPT60
  • 24 ft.
  • Check original torch to verify.  Some newer 256S use S75 up to 2015

Input
Output
$389.00 Buy Now FINANCE
PT 80 70/80A 24 ft Blowback Start/Central
Need To Know:
  • Fits 2015 and newer PowerPlasma 80S with Central Connector
  • Back Striking design starts arc on shoulder
  • Tecmo/Innotech PT80/iPT80
  • 24 ft.
  • Central Connector

 

 

 

 
Input
Output
$479.00 Buy Now FINANCE
PT 80 70/80 A 14 ft Blowback Start/Central
Need To Know:
  • Fits 2015 and newer PowerPlasma 80S with Central Connector
  • Back Striking design starts arc on shoulder
  • Tecmo/Innotech PT80/iPT80
  • 14 ft.
  • Central Connector

 

 

 

Input
Output
$449.00 Buy Now FINANCE
EV-SG55 15 ft. 50/60 Amp HF Start/ No Pilot Arc
Need To Know:
  • SG 55
  • HF Start
  • Non Pilot Arc
  • Fits: Supercut 40, 50 units without pilot arc
Input
Output
$129.00 Buy Now FINANCE
EV-AG60 15 ft. 60 Amp HF/ Pilot Arc Threaded
Need To Know:
  • AG 60
  • HF Start
  • Pilot Arc
  • Threaded metric connection
  • Fits: SuperCut 50P, SuperUltra 205, PowerUltra 205/205P, PowerPro 256, Older Model PowerPlasma 60 with HF start and Pilot Arc
  • Reuse existing DINSE connector for Multi units
Input
Output
$139.00 Buy Now FINANCE
EV-AG60 15 ft. 60A HF/Pilot Arc/ Central Connector
Need To Know:
  • AG60
  • HF Start
  • Pilot Arc
  • Central Connector
  • Fits: Older PowerPlasma 60 models with HF start and Pilot arc fitted with the Central connector
Input
Output
$159.00 Buy Now FINANCE
EV-AG60 25 ft. 60Amp HF/Pilot Arc Threaded
Need To Know:
  • AG 60
  • HF Start
  • Pilot Arc
  • Threaded metric connection
  • Fits: SuperCut 50P, SuperUltra 205, PowerUltra 205/205P, PowerPro 256, 226, older model PowerPlasma 60
  • Reuse existing DINSE connector for Multi units
Input
Output
$159.00 Buy Now FINANCE
EV-AG60 25 ft. 60A HF/Pilot Arc/ Central Connector
Need To Know:
  • AG 60
  • HF Start
  • Pilot Arc
  • Central Connector
  • Fits: PowerPlasma 60 with HF start and Pilot arc feature with one piece Central connector
Input
Output
$149.00 Buy Now FINANCE
EV-P80 Torch Head Replacement
Need To Know:
  • Torch Head replacement for EV-P80 torches
  • OEM Replacement kit for P80 torches
  • High Frequency Torch with Pilot Arc
Input
Output
$69.00 Buy Now FINANCE
EV-P80 15 ft. 80A HF/Pilot Arc Threaded
Need To Know:
  • P80
  • HF Start
  • Pilot Arc
  • Threaded Metric compression connection
  • Fits:  Older PowerPlasma 60, 70 and 80 models with threaded connection and older model PowerPro 256/226 with HF start and Pilot Arc
  • Reuses DINSE connector on Multi units
Input
Output
$149.00 Buy Now FINANCE
EV-P80 15ft. 80A HF/Pilot Arc Central Connector
Need To Know:
  • P80
  • HF Start
  • Pilot Arc
  • Central connector
  • Fits: Older model PowerPlasma 60, 70, 80 with a central connector
Input
Output
$169.00 Buy Now FINANCE
EV-P80 25 ft. 80A HF/Pilot Arc Central Connector
Need To Know:
  • P80
  • HF Start
  • Pilot Arc
  • Central connector
  • Fits: Older model PowerPlasma 60, 70, 80 with a central connector

 

Input
Output
$189.00 Buy Now FINANCE
Trafimet® A-81 25 ft. 80A HF/Pilot Arc Threaded
Need To Know:
  • Genuine Trafimet® A-81
  • HF Start
  • Pilot Arc
  • Metric threaded compression fitting
  • Fits: Older PowerPlasma 60, 70, 80 models with threaded connection and older model PowerPro 256/226 with HF start and Pilot arc
  • Reuses DINSE connector on Multi units

 

Input
Output
$339.00 Buy Now FINANCE
Trafimet® A-81 15 ft. 80A HF/Pilot Arc Threaded
Need To Know:
  • Genuine Trafimet® A-81
  • HF Start
  • Pilot Arc
  • Metric threaded compression fitting
  • Fits: Older PowerPlasma 60, 70, 80 models with threaded connection and older model PowerPro 256/226 with HF start and Pilot arc
  • Reuses DINSE connector on Multi units
Input
Output
$279.00 Buy Now FINANCE
EV-P80 25 ft. 80A HF/Pilot Arc Threaded
Need To Know:
  • P80
  • HF Start
  • Pilot Arc
  • Metric threaded compression fitting
  • Fits:  Older PowerPlasma 60, 70 and 80 models with threaded connection and older model PowerPro 256/226 with HF start and Pilot Arc
  • Reuses DINSE connector on Multi units
Input
Output
$169.00 Buy Now FINANCE
Trafimet® A-81 25 ft. 80A HF/Pilot Arc Central
Need To Know:
  • Genuine Trafimet® A-81
  • HF Start
  • Pilot Arc
  • Central Connector
  • Fits: Older PowerPlasma 60, 70, 80 models with HF start and equipped with Central Connector

 

Input
Output
$359.00 Buy Now FINANCE
Trafimet® A-81 15 ft. 80A HF/Pilot Arc Central
Need To Know:
  • Genuine Trafimet® A-81
  • HF Start
  • Pilot Arc
  • Central Connector
  • Fits: Older PowerPlasma 60, 70, 80 models with HF Start and Central connector

 

Input
Output
$299.00 Buy Now FINANCE
EV-S45 Torch head replacement kit
Need To Know:
  • Replaces S-45 Torch heads
  • Fits most PowerPlasma 50 and PowerPRO 164 and 205/PowerUltra 205 S-45 torches
  • Direct replacement for Purple EV-S45 torches
Input
Output
$49.00 Buy Now FINANCE
EV-S45 15ft. 40/50 A Blow Back Start Threaded
Need To Know:
  • Blow-back start
  • Pilot Arc
  • Threaded connector
  • Fits PowerUltra Series, PowerPro 164, 205, 205S without High Frequency
  • Must reuse DINSE connector
  • Fits earlier PowerPlasma 50 units with threaded connector without High Frequency
Input
Output
$149.00 Buy Now FINANCE
EV-S45 15ft. 40/50 A Blow Back Start Central
Need To Know:
  • Blow-back start
  • Pilot Arc
  • Threaded connnector
  • Fits PowerPlasma 50 with central connector
  • Not for High Frequency units
Input
Output
$179.00 Buy Now FINANCE
EV-S45 25ft. 40/50 A Blow Back Start Threaded
Need To Know:
  • Blow-back start
  • Pilot Arc
  • Threaded connector
  • Fits PowerUltra Series, PowerPro 164, 205, 205S without High Frequency
  • Must reuse DINSE connector
  • Fits earlier PowerPlasma 50 units with threaded connector without High Frequency

 

Input
Output
$189.00 Buy Now FINANCE
EV-S45 25ft. 40/50 A Blow Back Start Central
Need To Know:
  • Blow-back start
  • Pilot Arc
  • Threaded connnector
  • Fits PowerPlasma 50 with central connector
  • Not for High Frequency units

 

Input
Output
$209.00 Buy Now FINANCE
Trafimet® S-75 15 ft. 80A Blowback Start Threaded
Need To Know:
  • Genuine Trafimet® S-75
  • Blow-back start
  • Pilot Arc
  • Threaded connector
  • Fits S- Series PowerPro models. 
  • Must reuse DINSE connector
Input
Output
$299.00 Buy Now FINANCE
Trafimet® S-75 Torch Head Kit
Need To Know:
  • Direct replacement for Trafimet S-75 torch heads
  • Blow back design
  • Fits non PowerPlasma 60, 70, and 80, and PowerPro 256S
Input
Output
$169.00 Buy Now FINANCE
Trafimet® S-75 15 ft. 80A Blowback Start Central
Need To Know:
  • Genuine Trafimet® S-75
  • Blow-back start
  • Pilot Arc
  • Central connector
  • Fits 2013 S Series PowerPlasmas and up

 

Input
Output
$339.00 Buy Now FINANCE
Trafimet® S-75 25 ft. 80A Blowback Start Threaded
Need To Know:
  • Genuine Trafimet® S-75
  • Blow-back start
  • Pilot Arc
  • Threaded connector
  • Fits S- Series PowerPro models. 
  • Must reuse DINSE connector

 

Input
Output
$349.00 Buy Now FINANCE
Trafimet® S-75 25 ft. 80A Blowback Start Central
Need To Know:
  • Genuine Trafimet® S-75
  • Blow-back start
  • Pilot Arc
  • Central connector
  • Fits 2013 S Series PowerPlasmas and up

 

Input
Output
$389.00 Buy Now FINANCE
Trafimet® A101 15 ft. 100A, HF/Pilot Arc Threaded
Need To Know:
  • Genuine Trafimet® A 101
  • High Frequency
  • Pilot Arc
  • Threaded connector
  • Fits: older model PowerPlasma 100 with threaded connector
Input
Output
$329.00 Buy Now FINANCE
Trafimet® A101 15 ft. 100A, HF/Pilot Arc Central
Need To Know:
  • Genuine Trafimet® A 101
  • High Frequency
  • Pilot Arc
  • Fits: PowerPlasma 100 with Central connector

 

Input
Output
$359.00 Buy Now FINANCE
Trafimet® A101 25 ft. 100A, HF/Pilot Arc Threaded
Need To Know:
  • Genuine Trafimet® A 101
  • High Frequency
  • Pilot Arc
  • Threaded connector

 

 

Input
Output
$379.00 Buy Now FINANCE
Trafimet® A101 25 ft. 100A, HF/Pilot Arc Central
Need To Know:
  • Genuine Trafimet® A 101
  • High Frequency
  • Pilot Arc
  • Fits: PowerPlasma 100 with Central connector

 

Input
Output
$399.00 Buy Now FINANCE
Trafimet® S-45P-Autocut CNC/Machine Torch 25 ft.
Need To Know:
  • Blow-back start
  • Pilot Arc
  • Central Connector
  • Fits PowerPlasma 50 with central connector
  • Not for High Frequency units
  • Recommended for cutting thin materials or materials with thin kerf requirements up to 5/16"
  • Recommended for PowerPlasma 50 units with Euro Connector and CNC port

 

Input
Output
$379.00 Buy Now FINANCE
Trafimet® S-75P-Autocut CNC/Machine Torch 25 ft.
Need To Know:
  • Blow-back start
  • Pilot Arc
  • Central Connector
  • Used for CNC, Track torch, and pipe beveling applications
  • Not for High Frequency units
  • Recommended for cutting thin materials or materials up to 1/2"
  • Recommended for PowerPlasma S series units with Euro Connector and CNC port

 

Input
Output
$499.00 Buy Now FINANCE
Trafimet® S-A81P-Autocut CNC/Machine Torch 25 ft.
Need To Know:
  • Genuine Trafimet® A-81P AutoCut
  • HF/HV capability
  • Pilot Arc
  • Central connector
  • Used with PowerPlasma 60C, can be used with older HF PowerPlasma units with central connector as well.
  • Used in CNC, pipe beveling, track torch applications
  • When used with HF, shielding may be required to prevent interference with electronic equipment.
  • Reuses DINSE connector on Multi unit
Input
Output
$425.00 Buy Now FINANCE