Parts

Operations
Drive Roll: Std. V groove, .035"-.045", Single drive
Need To Know:
  • Single drive roll for Power i MIG 140E, 200, 205, 210.  MTS 211Si
  • For all Everlast requiring one drive wheel.
  • .035"-.045" with V groove for steel (.9mm-.1.2mm)
  • Fits Everlast dual roll systems with one drive roll, and one tensioner/idler roll on top.
  • For Steel solid/hard wire
  • 1 piece only included.
Input
Output
$19.00 Buy Now FINANCE
Drive Roll: Std. V groove, .023"-.030", Single drive
Need To Know:
  • Single drive roll for Power i MIG 140E, 200, 205, 210.  MTS 211Si
  • For all Everlast requiring one drive wheel.
  • .023"-.030" with V groove for steel (.6mm-.8mm)
  • Fits Everlast dual roll systems with one drive roll, and one tensioner/idler roll on top.
  • For Steel solid/hard wire
  • May also be used to feed .035" wire with .8mm side
  • 1 piece only included.
Input
Output
$19.00 Buy Now FINANCE
Drive Roll: F. Core .035"-.045", Single Drive
Need To Know:
  • Flux Core drive roll fits all Everlast 2 roll drive feeds.
  • .035"-.045" (.9mm-.1.2 mm) Flux core wire (gasless)
  • 1 piece only included
Input
Output
$20.00 Buy Now FINANCE
Drive Roll: F. Core, .035"-.045" Double Drive
Need To Know:
  • Flux Core drive roll fits Power i-MIG 230i, 275S, 275P, and PowerMTS 251Si(with 4 roll system only)
  • Also fits 4 roll system PoweriMIG 210
  • For use with "4 roll" system with 2 sets of drive rolls (1Drive+1Idler x2)
  • Consult Everlast for PowerMTS 400 matching
  • .035"-.045" (.9mm-1.2mm) Flux core wire (gasless)
  • 2 piece Kit
Input
Output
$48.00 Buy Now FINANCE
Drive Roll: F. Core, .030"-.040" Double Drive
Need To Know:
  • Flux Core drive roll fits Power i-MIG 230i, 275S, 275P, and PowerMTS 251Si(with 4 roll system only)
  • Also fits 4 roll system PoweriMIG 210
  • For use with "4 roll" system with 2 sets of drive rolls (1Drive+1Idler x2)
  • Call Everlast before ordering with PowerMTS 400 for size verification
  • .030"-.040" (.8mm-.1mm) Flux core wire (gasless)
  • 2 piece Kit
Input
Output
$48.00 Buy Now FINANCE
7 Pin plug 3 groove for MTS
Need To Know:
  • Fits MTS units with 7 pin plugs with for TIG torches, spool guns, foot pedals
  • 9/16" (nominal) diameter
  • Uses 3 assymetrical/offset locating tabs
  • Same body as 5 pin for old 210EXT. Confirm pin number before ordering.
Input
Output
$10.99 Buy Now FINANCE
Red water quick connect 9mm Lincoln® style: Set
Need To Know:
  • Color Coded Red for easy ID
  • Intended for Hot water inflow into cooler
  • Hose barb connection (hose not included)
  • Male/Female set
Input
Output
$16.99 Buy Now FINANCE
Blue water quick connect 9mm Lincoln® style: Set
Need To Know:
  • Color coded blue for easy ID
  • Intended for cold water outflow from cooler
  • Hose barb connection (hose not included)
  • Male/Female
Input
Output
$16.99 Buy Now FINANCE
Gas quick connect 9mm Lincoln® style: Set
Need To Know:
  • Replacement for argon torch quick connects
  • Male/female set
  • Standard brass color
  • Hosebarb connection
  • Can be used to replace water connections
Input
Output
$14.99 Buy Now FINANCE
240V to 120V Pig Tail Adapter 8"
Need To Know:
  • Converts existing 240V NEMA 6-50P to 120V NEMA 5-15P
  • For use with all Everlast Dual Voltage Welders and Plasma Cutters
  • Short adapter for easy stowability

 

 
Input
Output
$34.99 Buy Now FINANCE
Red Extension From Torch to Cooler
Need To Know:
  • Extends length of water cooler lines from TIG torch to water cooler
  • Recommended or use with welding carts where torch lines may not be long enough
  • Includes Male/Female Coupler.
  • Red (Return line for hot water)

 

Input
Output
$14.99 Buy Now FINANCE
Blue Extension From Torch to Cooler
Need To Know:
  • Extends length of water cooler lines from TIG torch to water cooler
  • Recommended or use with welding carts where torch lines may not be long enough
  • Includes Male/Female Coupler.
  • Blue (Out Flow line for Cool Water to Torch)
Input
Output
$14.99 Buy Now FINANCE
Small DINSE Adapter for Plasma Torches
Need To Know:
  • Used to adapt Plasma torches to TIG/Stick/Plasma units
  • DINSE 25 (3/8" approximate diameter)
  • If unsure measure diameter of DINSE connector before ordering.
Input
Output
$19.99 Buy Now FINANCE
Large DINSE Adapter for Plasma Torches
Need To Know:
  • Used to adapt Plasma torches to TIG/Stick/Plasma units
  • DINSE 50 (1/2" diameter)
  • If unsure measure diameter of DINSE connector before ordering.
Input
Output
$19.99 Buy Now FINANCE