Senior Member
why not just buy the miller input cable and plug kit only like a 100 bucks then is safe and looks nice , here is were you can buy cords and plugs http://www.brwelder.com/indextemplat...&SubCategory=8 those MOTOR GUARD FILTER # M-26 are nice i use one for dry clean air for my plasma cutter
Last edited by Rodsmachineshop; 04-04-2012 at 01:08 AM.
Senior Member
That does look like a nice deal. These dual voltage machines are quite interesting... But he does have the plugs already.Originally Posted by Rodsmachineshop
The double ended ones look pretty spooky....
BTW what voltage are you going to use when you hook it up to the generator??? The 220 plugs have a 4 pin twist lock on the generator.
Had me kind of curious when you showed X and Y on the twist lock.... A 3 phase plug????? Mine 3 phase plugs I thought were 4 pin with ground.
BTW when you were asking about wiring up connectors, when I replied I thought you were asking something different... I always wanted to put a square metal box on the end of an extension cord. That way you could plug in your welder and then have an extra couple 110 outlets for a grinder or such.
Shade tree MIG welder.
Now a Shade tree TIG welder.
Member
That is a 240 VAC single phase plug - 2 poles and a ground.
__________________________
Everlast Power I-MIG 200
Everlast PowerUltra 205P
Everlast SM 200-N
Thermal Dynamics Cutmaster 42
Senior Member
Where were you a couple pages ago...I've got $100 in what I have now
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
Senior Member
Yes, but try putting a dollar value on the practical experience you (and the rest of us) got out of the deal!
DaveO
Oxweld oxy acet gear
IMIG 200
PowerTIG 210 EXT... Amazing!
Senior Member
never could see why darn plugs are so expensive
Posting Permissions
Reply With Quote