Need some help with wiring my I-MIG 200 pigtails?

[Rodsmachineshop]

http://www.marchansen.com/tn102/#2 place for different style plugs and letter codes

[everlastsupport]

The 50A CS style twist locks I use are labeled in a similar fashion: X,Y,W and ground. They are single phase as well.

Cheers
Mike

Just don't use "W" (neutral). X and Y are hot legs (no matter what color is which one) and green to ground (sometimes will have green paint/die). In most cases, ground is normally obvious looking, the two hots normally look the same but opposite.

[posixPilot]

Just don't use "W". X and Y are hot and ground.

That is correct; I have another cord set (for my generator) that I have wired neutral through W, but the connector on my welder is X,Y and ground.

Cheers
Mike

[Brian Ski]

http://www.marchansen.com/tn102/#2 place for different style plugs and letter codes

Must be a new coding... I see they keep G for ground... W for neutral.... and X Y Z for hot (different phases)

I stopped by the hardware store some months back and they said you would not believe how many ask for a double male ended extension cord. They want one when they string Christmas lights and they get 2 female ends next to each other. (remember there will be a live male plug at the very end!!!!)