Quote Originally Posted by johnnymg View Post
DCEN works pretty good actually. Only a very light amount of 'spatter' which brushes off easily. NOT as clean as C25 and solid wire by any means, but "good enough" for Gov work. Also, this flux core wire seems to 'burn through' mill scale with ease so I suspect/hope it will be good for my semi dirty/rusty fence repair.

Oh, the smooth rollers seem to work OK with this wire.

regards
JohnG
Ya must've missed post #15.
If you have any problems with the wire getting jammed in the tip just go up to the next size tip and it'll work fine.