Foot Pedal Upgrade

[Ray]

Those unfortunately are the wrong connectors, they are too small, I ordered 6 and they will not work. I’m looking for a source for the correct connectors.

[cmd]

Those unfortunately are the wrong connectors, they are too small, I ordered 6 and they will not work. I’m looking for a source for the correct connectors.

please announce this if you find something. I have been looking.

http://www.mouser.com/Interconnects/...ors/_/N-76q5a/


looked here? there is similar, not same, not that i found, awesome company though, they have tons of stuff.

[Rugar]

Those unfortunately are the wrong connectors, they are too small, I ordered 6 and they will not work. I’m looking for a source for the correct connectors.

Well at least it was only 6 bucks.

[jimbos'ss]

great info, I don't use the pedal much, but it would be nice to have a lower profile one.

[jakeru]

Those unfortunately are the wrong connectors, they are too small, I ordered 6 and they will not work. I’m looking for a source for the correct connectors.

D'oh! That's a surprise! It sure looks exactly like the connector on my 3 year old Everlast Super200P... but then again I haven't actually bought one to test fit like you did.

Question for everlast: Did everlast use the same 7 pin footpedal connector across all their machines, past and present?

[everlastsupport]

The newer machines have a larger 7 pin connector. The pins are larger too.

[jakeru]

The newer machines have a larger 7 pin connector. The pins are larger too.

Thanks for shedding light on this, Mike! I'll bet that connector I posted the link to is still probably the correct part for my "oldschool" Everlast machine then.

Edit: Ray, want to sell me your connectors? (I probably have more use for them than you do. :lol: )

[Rugar]

Thanks for shedding light on this, Mike! I'll bet that connector I posted the link to is still probably the correct part for my "oldschool" Everlast machine then.

Edit: Ray, want to sell me your connectors? (I probably have more use for them than you do. :lol: )

If not, I will send you mine when they get here after verifying they wont fit my 250ex.

[Ray]

I got the connectors from that exact post 2 for 3, if you would like them i'll send them to you for the cost of the postage.
Just PM me.

Ray

P.S. I have a guy at Greybar trying to find the correct ones now. (I gave him a sample, but there are no part numbers on the original connectors) I'll share part numbers for the replacements if he is successful.

[everlastsupport]

Jake,

I was cleaning up today and found a smaller pin size 7 pin connector (Super series). PM me an address and I will send it to you if you need it.

[Rugar]

I got the connectors from that exact post 2 for 3, if you would like them i'll send them to you for the cost of the postage.
Just PM me.

Ray

P.S. I have a guy at Greybar trying to find the correct ones now. (I gave him a sample, but there are no part numbers on the original connectors) I'll share part numbers for the replacements if he is successful.

Any luck on this yet Ray?
Also, are the new Everlast low profile pedals coming in with the new welder shipment, from which I understand should be in soon? Any idea what the price will be?

[Velocity]

Mark if that's not it, then can you post a picture of the new model? thanks.