Foot Pedal Upgrade

[Joe from NY]

is there a new design that would fit the 200DX also?

[everlastsupport]

is there a new design that would fit the 200DX also?

The DX has a different pedal. I have not opened the new low profile pedal (and seen inside), but I would "guess" you could move one pot and add another to make it work, matched it. But still, not 100% sure as I have not seen one.

Maybe Mark has or Ray have input?

[Joe from NY]

This page http://www.everlastgenerators.com/Replace-parts.php shows two different pedal descriptions, with a $30 price difference, yet they both show the same identical photo. The URL of each of the photos point to the exact same page. That photo was copied directly from the SSC site http://www.ssccontrols.com/images/pr...%20RFCS-14.jpg and then had the end connector photoshopped off the. Did whoever coded the page mistakenly point to the wrong photo for one of the descriptions? Is there a link somewhere that would point to the missing photo? Is one of the pedals supposed to be the SSC pedal? Which pedal is actually shown in the two photos? You can see by comparison of the Everlast photos to the SSC site, that the Everlast webpage http://www.everlastgenerators.com/pr...ot-Pedal_1.jpg actually alters the aspect ratio of the photo, making the pedal appear taller than it actually is. The SSC photo of the pedal shows it to be even a lower profile.

Is the $149 one the SSC sourced one? Could I order that from Everlast to fit my 200DX?

Sorry for the multiple questions, but if anybody can just answer only one, feel free to jump in.

[Joe from NY]

So can anyone advise if the SSC pedal Everlast sells is compatible with the 200DX?

If so, does anyone have any comments on how well it works on the 200DX, and is there much of a difference from the stock pedal with the adjustment knob?

Thanks

[performance]

No, the Pedal from SSC isn't compatable.

[Injected65]

So is there any consensus on a part number or place to buy the plugs for the newer pedals? I've upgraded to a 25' torch and a pedal extension is my only option that I can see since I have the 200DX with the built in pot.

Thanks,
Chris