Share
Results 1 to 20 of 23

Thread: low hydrogen rod

Threaded View

gwk low hydrogen rod 10-04-2009, 11:44 PM
performance Hydrogen is an enemy of... 10-04-2009, 11:56 PM
smackdaddy WHAT??? So 7018 used in... 10-08-2009, 07:06 PM
matteh99 Performance didn't say 7018... 10-08-2009, 07:35 PM
performance E7018-1 h4r is a very low... 10-08-2009, 08:24 PM
smackdaddy Ah thanks for clarifying.... 10-09-2009, 04:29 PM
everlastsupport Please do not smoke crack,... 10-10-2009, 01:27 AM
jtybt By using an oven, is the... 01-26-2010, 05:02 PM
everlastsupport The moisture gets in the... 01-26-2010, 05:11 PM
performance You are trying to keep out... 01-26-2010, 10:41 PM
jtybt OK, Got about 20 lbs left in... 01-27-2010, 07:23 PM
performance Rebake must be done higher... 01-27-2010, 08:55 PM
geezer not so keene on keen 02-22-2010, 08:37 PM
performance He is talking about toaster... 02-22-2010, 11:16 PM
Wookie 600 deg some are 800 deg and... 03-20-2011, 02:02 AM
Mikeymetal I heard that aboard any navy... 04-22-2011, 02:43 AM
Ray I’m pretty sure that’s... 04-22-2011, 05:37 AM
DaveO I'm not military so I don't... 04-22-2011, 01:37 PM
Ray You hit it on the head DaveO.... 04-22-2011, 05:11 PM
Wookie be it 6010 7018 6012 6013 all... 03-20-2011, 01:58 AM
dwdw Dry Rods 04-20-2011, 02:51 PM
performance Wookie, I can assure you... 04-20-2011, 04:51 PM
welderdude Here is the difference... 04-21-2011, 11:35 PM
Previous Post Previous Post   Next Post Next Post
  1. 01-27-2010, 08:55 PM #12
    performance's Avatar
    performance is offline Everlast Sales and Support Team
    Join Date
    Jul 2009
    Posts
    5,371
    Blog Entries
    1

    Default

    Rebake must be done higher than that or no good. Must reach about 600 degrees. This is NOT and endorsement of their products, but you can see what I mean. This is helpful and accurate info, even if it is on a commercial site selling ovens. http://www.keenovens.com/articles/7018-storage.htm

    Read parts 1 and 2
    Last edited by performance; 01-27-2010 at 08:58 PM.
    Mark
    performance@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x204
    M-F 9am - 5pm EST
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules