Air Pressure

[brucer]

The one thing that made since was long hose, I'm using 100ft 1/4" hose to the motor guard then 3/8" from filters to the machine. So should I get a 25'x3/8" hose from the compressor to the filter?

ditch the 1/4" hose, its entirely too small..

Is there anyway you can run a 3/4" hard line, then put a quick connect there, then come from there with the 3/8 hose?

[millermatic]

ditch the 1/4" hose, its entirely too small..

Is there anyway you can run a 3/4" hard line, then put a quick connect there, then come from there with the 3/8 hose?

I looked again to be sure on hose size and it 3/8 not 1/4, so I'm going to remove the in line desiccant filter and only use the m-30. I would hard line the connection but I need the plasma to be Mobil.