Share
Results 1 to 20 of 25

Thread: Everlast 225 LX or Miller syncrowave?

Hybrid View

brad3579 Everlast 225 LX or Miller... 02-21-2012, 02:38 AM
DVA An inverter machine will pull... 02-21-2012, 03:22 AM
dyethor If it were me I would go for... 02-21-2012, 03:32 AM
srp The Sycrowave 250 may be a... 02-21-2012, 08:20 AM
SeanMurphy265 For me warranty is a big... 02-21-2012, 11:25 AM
brad3579 It would be used in the shop... 02-21-2012, 02:51 PM
dyethor I'm not an electrical... 02-21-2012, 03:34 PM
jp2code So, would a Syncrowave 250... 02-21-2012, 04:14 PM
performance In rush current demands when... 02-21-2012, 04:41 PM
srp I ran my Syncrowave 250 on a... 02-21-2012, 09:31 PM
jp2code Thanks srp. All this helps... 02-21-2012, 09:35 PM
brad3579 I believe that the Syncrowave... 02-22-2012, 12:30 PM
brad3579 Are you running 130 amps on a... 02-22-2012, 12:38 PM
dyethor That's running 130 output... 02-22-2012, 01:25 PM
brad3579 Is that running on 120 vac or... 02-22-2012, 01:32 PM
dyethor Its on 220vac 02-22-2012, 01:51 PM
brad3579 That seems really low on the... 02-22-2012, 03:00 PM
dyethor Ok I was wrong. I looked at... 02-22-2012, 03:20 PM
jp2code A diesel generator. I like... 02-22-2012, 03:43 PM
dyethor It runs nice. My boss had it... 02-22-2012, 04:07 PM
jp2code Thanks. I would only use a... 02-22-2012, 06:03 PM
singlesupra I use both daily and ill take... 04-12-2012, 06:10 AM
brad3579 Thanks for the input, I ended... 04-13-2012, 10:37 PM
Powertig To reply to your original... 02-22-2012, 06:27 PM
welderdude Its a hard decision you have... 02-23-2012, 03:40 AM
Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    Ok I was wrong. I looked at the generator in my shop, then looked for the specs online. The generator is a titan7500 the max output wattage is only 6800, that's a misleading product name. I'm not sure what the breaker is rated for there's no rating on the breaker, generator, nor in the literature online. My guess is its probably 20 or 25 amps.
    Power tig 225lx
    Hand tools up the wazoo.

  2. #2

    Default

    Quote Originally Posted by dyethor View Post
    Ok I was wrong. I looked at the generator in my shop, then looked for the specs online. The generator is a titan7500 the max output wattage is only 6800, that's a misleading product name. I'm not sure what the breaker is rated for there's no rating on the breaker, generator, nor in the literature online. My guess is its probably 20 or 25 amps.
    A diesel generator. I like that.

    How long have you had it? How does it perform? Did you pay $5980 for it?

  3. #3

    Default

    It runs nice. My boss had it sitting brand new still in the plastic up on a shelf for a year or two. I brought it down changed the oil, put a new battery in and it fired right up. Electric start is a must have on this thing. Even with a compression release pull starting is damn near impossible. When the cylinder gets to the compression stroke it almost rips my hand off my wrist, and I'm not a small guy. I don't know what he paid for it but I can say with certainty he didn't pay that much. One nice feature is the remote on/off. Comes in handy when you are working on top of a trailer, are done welding and don't want to listen to the generator any more.
    For what its rated for it works perfect. Its just not enough to run my welder at its full potential.
    Power tig 225lx
    Hand tools up the wazoo.

  4. #4

    Default

    Thanks. I would only use a generator about every 6 months, so gasoline would have rotted inside any unit. Diesel will keep much longer. (Indefinitely?)

Similar Threads

  1. miller aerowave vs. 250 ex
    By johnson697 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 3
    Last Post: 07-12-2015, 12:10 AM
  2. new miller machine rollout / good for everlast
    By fdcmiami in forum TIG Welding (GTAW/GTAW-P)
    Replies: 23
    Last Post: 11-18-2013, 09:13 PM
  3. Miller-vs-Lincoln-Everlast
    By kunk in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 6
    Last Post: 06-23-2012, 01:12 PM
  4. Miller Push Pul gun with the new Everlast 250P
    By brianarizona in forum General Welder Questions
    Replies: 4
    Last Post: 01-24-2012, 03:49 AM
  5. Replies: 0
    Last Post: 06-09-2011, 06:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •