Share
Results 1 to 20 of 44

Thread: 256 questions

Hybrid View

tnc110 256 questions 01-29-2012, 03:11 AM
zoama Does your plasma torch say... 01-29-2012, 03:51 AM
everlastsupport Where you sweaty? If you... 01-29-2012, 11:46 AM
tnc110 I wasnt sweaty...was wearing... 01-29-2012, 02:31 PM
everlastsupport You need to be about 1/4"... 01-29-2012, 03:16 PM
tnc110 I should be able to pull the... 01-29-2012, 03:27 PM
tnc110 Ok...just looked at the... 01-29-2012, 03:42 PM
ChadP You should get a flame in the... 01-29-2012, 03:44 PM
zoama There are numbers on the side... 01-29-2012, 05:23 PM
tnc110 [QUOTE=zoama585;21948]There... 01-29-2012, 06:32 PM
zoama I don't know about that... 01-29-2012, 07:48 PM
Jake98 [QUOTE=tnc110;21953] That... 01-29-2012, 09:19 PM
tnc110 Air pressure was set at 60... 02-02-2012, 01:02 AM
performance That torch is made by... 02-02-2012, 01:08 AM
tnc110 Does Everlast sell parts for... 02-02-2012, 01:40 AM
everlastsupport If it was set at 60PSI, that... 02-02-2012, 11:28 AM
Jake98 When did we start using flow... 02-02-2012, 12:25 PM
everlastsupport The trafimet A81 comes with a... 02-02-2012, 12:40 PM
tnc110 Mine did not. 02-03-2012, 12:53 AM
everlastsupport Then make sure you use 72PSI.... 02-03-2012, 11:19 AM
mkzero [QUOTE=Jake98;21967] No. ... 03-19-2012, 09:30 PM
performance In the absence of comparison,... 03-19-2012, 09:37 PM
mkzero Guess I got spoiled on the... 03-19-2012, 09:52 PM
performance Trafimet USA can provide you... 03-19-2012, 10:06 PM
mkzero Thanks! that seems to be... 03-20-2012, 03:14 PM
everlastsupport Let us know how it (CV0201)... 03-20-2012, 04:04 PM
Titan winch Turn the pulse switch off .... 01-31-2012, 01:33 AM
everlastsupport I've never seen that as well.... 01-31-2012, 11:47 AM
tnc110 Ok...so I took the cover off... 02-03-2012, 01:03 AM
67cudafb I think this is the guy on... 02-03-2012, 01:45 AM
performance At most you'll only need a... 02-03-2012, 02:39 AM
Effinay I've been a reasonably happy... 05-02-2012, 04:14 AM
Titan winch It has been quite some time... 05-02-2012, 12:54 PM
everlastsupport On the gauge. You can get... 05-02-2012, 01:03 PM
Jake98 Hey, he has an 'Inventor... 02-03-2012, 03:40 AM
srp My A81 torch got burned the... 03-21-2012, 05:18 AM
Titan winch Looking at the damage to the... 01-29-2012, 10:52 PM
performance That can also be a result of... 01-30-2012, 02:32 AM
posixPilot Agreed that the torch looks... 01-29-2012, 09:59 PM
tnc110 http://s999.photobucket.com/al... 01-30-2012, 11:38 PM
performance The arc is firing. It is... 01-30-2012, 11:59 PM
tnc110 I just got this unit...it... 01-31-2012, 12:43 AM
Jake98 When that torch flashes it... 01-31-2012, 12:07 AM
Titan winch The correct psi for the A81... 02-02-2012, 01:53 PM
Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    When did we start using flow gauges on plasma? That's new to me.
    Everlast PowerPlasma70
    Hobart Ironman 230
    Lincoln A-D/C 225
    'Classic' Everlast Powertig 200DX 'We don't need no steenkin pre-flow..'
    jakemateer.com

  2. #2

    Default

    Quote Originally Posted by Jake98 View Post
    When did we start using flow gauges on plasma? That's new to me.
    The trafimet A81 comes with a flow gauge.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  3. Default

    Quote Originally Posted by everlastsupport View Post
    The trafimet A81 comes with a flow gauge.
    Mine did not.

  4. #4

    Default

    Quote Originally Posted by tnc110 View Post
    Mine did not.
    Then make sure you use 72PSI. All of our units will handle 60-75 pretty much and lower. The A81 likes to be over 65, unlike all our other torches.

    As Duncan posted it works out to 72PSI for the A81. So just use that pressure. The flow gauge to me was, OK use it one time and it sets on the shelf now.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Similar Threads

  1. Questions About I-Mig 140
    By esg612 in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 16
    Last Post: 02-22-2017, 06:26 PM
  2. New guy with 250ex questions.
    By gree box in forum TIG Welding (GTAW/GTAW-P)
    Replies: 26
    Last Post: 01-29-2013, 10:11 PM
  3. Pu 205 questions please
    By Dne007 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 4
    Last Post: 03-13-2012, 08:12 PM
  4. spool gun questions
    By Ram48 in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 2
    Last Post: 10-25-2011, 01:34 AM
  5. 250EXT Questions
    By zoama in forum TIG Welding (GTAW/GTAW-P)
    Replies: 2
    Last Post: 09-08-2011, 01:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •