Eddie, I am certai that people would be interested in these. What might you sell one for?
New Member
Eddie, I am certai that people would be interested in these. What might you sell one for?
When opportunity knocks, most do not recognize it, because it shows up wearing overalls and looking like work!!
Joshua,Tacoma,Wa
24'x48'shop-6/2010
Hobart Handler125w/125cf 75/25-1998-Welds perfect
Power tig250EX-w/300cf argon-2/2011-had 4053 problem, fxed and good as new
Power Cool W300-4/2011-works great after making hoses
Power Plasma 50-4/2011-in for repair
Shop air
New Member
Yesterday I went to Princess Auto and picked up a little "Jewelers/Jewelery drill" for $10. It has 4 collets that will accept .1mm up to 2mm.
I think it's brilliant since I like cutting my tungsten down to 2''-3'' pieces and then grinding both ends. Having almost 30 pieces with both ends sharpened helps keep me in the welding groove when I don't have to get up and go sharpen a piece.
I"ll post up some pics later.
Member
I sharpen (and polish) mine on a lapidary wet diamond grinder that I already had since I grind stones for jewelry.
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Posting Permissions
Reply With Quote