Share
Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: More Everlast Videos from Weldingtipsandtricks.com

  1. #1

    Default More Everlast Videos from Weldingtipsandtricks.com

    Jody has posted a few more videos of the units on weldingtipsandtricks.com, of both the 250EX and the PowerPro 256. In one he is stick welding with the 256 and in the other he gives a more detailed look at practical use of manual pulse welding.

    I hadn't gotten an update recently from his site. So I went to check it out and found these :http://www.youtube.com/user/weldingtipsandtricks

    Enjoy!

  2. #2

    Default

    It was his videos that convinced me to order a unit from you guys. I was looking for a used Miller before researching your units and a friend of mine was trying to get me to go with a different companies product but after watching Jody's video's and seeing the comparison between the Everlast and the Miller I decided to order a PowerPro 256. I think the video's are great from someone who is still learning welding.
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  3. #3

    Default

    Jody's videos are an excellent way to begin to understand most of the E'last welders advanced functions. Watching the whole series of "All those freakin knobs" vids helped put me miles further down the road rather than just experimenting alone...
    PowerTig 225LX
    PowerCool W300
    PowerPlasma 60S
    Miller 140 MIG

  4. Default

    Jodie's videos are the reason I bought the 256 [awaiting delivery]. He did some nice testing and took it through some paces. It's way more machine than I will ever need, but he sure sold it to me.
    I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.

    LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
    Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
    Everlast PP256

  5. #5

    Default

    another one is out

    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  6. #6
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    722

    Default

    Quote Originally Posted by Oleg View Post
    another one is out
    Informative video. I understood the mechanics of this from what I've been reading but it just makes a whole lot more sense being able to see a weld taking shape under the various conditions. Nice.
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  7. Default

    I'd like to know the physics behind the cleaning action. Anyone able to explain it or point me in the right direction?
    New to welding!
    Lots of Snap-On tools
    In need of more toys

  8. #8

    Default

    I think he explains it quite well...The force of the arc in part "blows" the oxide layer up in EP.

  9. #9

    Default

    It's an ionization issue. There's an interesting picture, I think I saw it in a welding text, that shows the transfer of electons and ions based on the polarity. S/F.....Ken M
    Lincoln Power MIG 300
    Everlast 160STH
    Miller 225 Thunderbolt (sold it)
    Lincoln Squarewave 175 TIG(traded it for)
    Miller DEL 200 welder/genset
    Thermal Dynamics 1250XL plasma cutter
    Miller XMT300

  10. Default

    Quote Originally Posted by EchoSixMike View Post
    It's an ionization issue. There's an interesting picture, I think I saw it in a welding text, that shows the transfer of electons and ions based on the polarity. S/F.....Ken M
    Yeah that's more what I was looking for. Something a little more technical on the physics side.
    New to welding!
    Lots of Snap-On tools
    In need of more toys

  11. #11

    Default

    http://www.esabna.com/euweb/awtc/Lesson2_11.htm

    ESAB covers some of it in the online lessons. S/F.....Ken M
    Lincoln Power MIG 300
    Everlast 160STH
    Miller 225 Thunderbolt (sold it)
    Lincoln Squarewave 175 TIG(traded it for)
    Miller DEL 200 welder/genset
    Thermal Dynamics 1250XL plasma cutter
    Miller XMT300

  12. Default

    Quote Originally Posted by EchoSixMike View Post
    http://www.esabna.com/euweb/awtc/Lesson2_11.htm

    ESAB covers some of it in the online lessons. S/F.....Ken M
    Awesome, thanks. I will give it a look over
    New to welding!
    Lots of Snap-On tools
    In need of more toys

  13. #13

    Default

    part two is out

    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  14. #14

    Default

    part one is out for PA160

    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  15. #15

    Default

    Quote Originally Posted by Oleg View Post
    part one is out for PA160
    That guy makes some nice looking welds.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  16. #16
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    722

    Default

    Quote Originally Posted by zoama585 View Post
    That guy makes some nice looking welds.
    That TIG weld was nice enough to frame. Nice endorsement of the flexibility of such a nice and compact welding machine.
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  17. #17

    Default

    I wish I could tig weld that good! No doubt that's a nice welding package!
    Lincoln Eagle Engine Drive
    Everlast MTS 250
    Everlast Power Tig 225lx
    HTP Mig 2400
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Miller Spectrum 375 Extreme Plasma cutter
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press


    www.murphywelding.com

  18. Default

    That video has made me seriously consider trying that TIG welder first before spending the money on a 200DX..

    I'd still rather go straight for the 200DX since I know I'd never outgrow that

    Regardless.. that is some pretty welding
    New to welding!
    Lots of Snap-On tools
    In need of more toys

  19. #19

    Default

    one more .. more to come

    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  20. #20

    Default

    Quote Originally Posted by ncsugrad2006 View Post
    That video has made me seriously consider trying that TIG welder first before spending the money on a 200DX..

    I'd still rather go straight for the 200DX since I know I'd never outgrow that

    Regardless.. that is some pretty welding
    The price is much better but no aluminum. The 160sth is a very nice unit for the money. I have both EX and 160sth. The 160sth is for portability. Like the IMIG-200 we use.

    If you watch the video it is quite a machine for the size and price.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Similar Threads

  1. Everlast Videos from Tim Robel @ Garage-Customs.com
    By Oleg in forum Everlast Announcements, Contests and Promotions
    Replies: 11
    Last Post: 05-26-2013, 01:55 AM
  2. Everlast Videos from Weld.com and Mr TIG
    By Oleg in forum Everlast Announcements, Contests and Promotions
    Replies: 45
    Last Post: 03-28-2013, 09:54 PM
  3. New video is out on PowerTig 185 micro from weldingtipsandtricks ...
    By Oleg in forum Everlast Announcements, Contests and Promotions
    Replies: 3
    Last Post: 07-16-2011, 01:04 AM
  4. New video is out on PowerTig 185 micro from weldingtipsandtricks ...
    By Oleg in forum Everlast Announcements, Contests and Promotions
    Replies: 0
    Last Post: 07-06-2011, 04:49 PM
  5. New Everlast Stick Welding Video from weldingtipsandtricks.com
    By performance in forum Stick Welding (SMAW)
    Replies: 7
    Last Post: 03-16-2011, 02:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •