Share
Results 1 to 4 of 4

Thread: 250 ex Arc starting

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Default Everlast Arc etc.

    Right on Gary, me too! I'm sick of people bashing anything made by the "C" word without researching and trying first. Of course there is still, and probably will always be, the CHEAPO JUNK availible. But more and more you see REAL QUALITY coming over. I discovered this in a brief foray into high end Flashlights. Yes there is a whole world of flashlight geeks out there! Anyway, same in that industry, ..... there is a ton of cheapo crap if you want, but as well there are some companies producing some INTENSE compitition for the high end market, at far more affordible prices. Wolf Eyes is one of those companies in that arena.

    As important, you can't match the attention to customer concerns, issues, etc. Whether it be general questions or problems, from the Everlast folks! And if I may say, I have not exactly been bashful about voicing any concerns or issues i may have had. So to any nay say'rs that wonder if everybody is on the "take" here, .... forget about it! I call it the way i see it, and i dig this company good and bad. Because they're listening, looking, researching and developing, and most importantly, producing!

  2. #2

    Default

    I realize this is an old post but I just came across it and had a little bit to add.

    Here's something anyone can do:

    This is Lincoln's quarterly SEC filing. You can find out a lot about the machines your buying just by doing a little research. When you get through reading this you will be happy that you discovered Everlast.

    http://www.sec.gov/Archives/edgar/da....htm#tx54742_7

    Theres a ton of info in the SEC filings... Soooo don't argue, just know when someone tells you different...
    Steve

    Miller 212
    Everlast 250EX
    Everlast PowerPlasma 60
    Victor O/A
    Current Project: 21' Jet Sled Rat Boat.

Similar Threads

  1. Arc starting issue Everlast 210 ext
    By ToTu in forum TIG Welding (GTAW/GTAW-P)
    Replies: 19
    Last Post: 02-21-2018, 09:46 PM
  2. Arc starting issue
    By gree box in forum TIG Welding (GTAW/GTAW-P)
    Replies: 20
    Last Post: 01-27-2018, 03:17 AM
  3. Starting an arc
    By Effinay in forum TIG Welding (GTAW/GTAW-P)
    Replies: 9
    Last Post: 05-23-2012, 02:34 AM
  4. Starting a new cut mid way
    By trickbiker in forum Everlast Plasma Cutters (PAC)
    Replies: 4
    Last Post: 01-16-2012, 09:25 PM
  5. Difference between blowback vs HF starting
    By Scooter in forum Everlast Plasma Cutters (PAC)
    Replies: 12
    Last Post: 06-17-2011, 01:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •