Share
Results 1 to 4 of 4

Thread: Spool Spool / Roll Adaptor for Power IMIg250P, DYI

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2010
    Location
    Chugiak , Alaska
    Posts
    259

    Post Spool / Roll Adaptor for Power IMIg250P, DYI

    The wire spool holder in the IMIg250P is designed for a 30-44 l/b roll. Though the inside diameter of the 10-12 l/b roll is the same it will not fit properly due to the difference in width. I fashioned this adaptor out of some PVC pipe to fit behind the roll and fit over the tension pin and lock into the notch on the roll, holding the proper tension on the wire roll and alignment with the wire feeder. It’s pretty crude, but doesn’t show, I painted this one red so it shows up, and your partner (or you) won’t try to install the large roll and wonder why it won’t fit.
    This was designed for the 250 but should work for the 205 and possibly other brands.
    Here is a link to plans and photos so you can make your own.

    http://www.everlastalaska.com/index....-Spool-Adaptor
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCN0639.jpg 
Views:	509 
Size:	40.5 KB 
ID:	450   Click image for larger version. 

Name:	DSCN0634.jpg 
Views:	497 
Size:	67.5 KB 
ID:	451   Click image for larger version. 

Name:	DSCN0636.jpg 
Views:	515 
Size:	53.1 KB 
ID:	452   Click image for larger version. 

Name:	Spool1.jpg 
Views:	514 
Size:	50.9 KB 
ID:	453  
    Last edited by Ray; 08-06-2010 at 12:14 AM. Reason: Added Pic, fixed title
    ____
    Ray

    Everlast Sales and Support Team.
    support@everlastalaska.com
    www.everlastalaska.com

    877-755-9353 X207

Similar Threads

  1. Power mig 275s Spool Gun
    By Blaze in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 4
    Last Post: 03-19-2016, 03:35 PM
  2. Spool Gun with i-Mig 205
    By cheebster in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 4
    Last Post: 10-03-2015, 07:44 PM
  3. Spool gun
    By Yofish in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 8
    Last Post: 03-16-2014, 11:55 PM
  4. Why can't I add a spool gun to my TIG?
    By performance in forum Welding articles from Professionals (knowledge database)
    Replies: 11
    Last Post: 07-21-2011, 10:12 PM
  5. SM 200-N Spool Gun ???
    By kenwhite in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 2
    Last Post: 05-23-2011, 01:08 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •