WP9 Torch With ITIG200

[buckshotscott]

Hey Guys,
I am trying to order an adapter to attach a WP20 torch like Trackmaster got to a PP256 but I have still not gotten the welder yet...still on the slow boat from China:-) Is the Dinse connector on the Everlast a standard 1/2" dinse or is it some metric size? There are a few choices on ebay and one appears to be a good choice for around $38.00 shipped and it has a 6 foot water line but I need to confirm the Dinse diameter before I pull the trigger. I will share the seller with everyone if it works out.
Thanks
Scott

[Kevin]

My PP256 came with 1/2 in Dinse connectors and I doubt they have changed the size. Please share the Ebay source for the connector you found.
I'm also waiting on that slow boat from China for a replacement PP256.

[Titan winch]

The U.S Sales Office will have the WP9 WP17 WP 20 with all the correct fitting for most of the Tig welders within 8 weeks
The one exeption at this time is the fittings for the POWER ULTRA 205
This unit uses a smaller Dinse connector and i have not ordered any torches compatible with it.
All models ordered are the flex head design
There is a limited number of these torches going to the US so i would suggest if any are interested in purchasing these to contact the Sales Office and tell them to put you on a mailing list for when they arrive.
Canadian Customers who are interested in these don't realy have to worry too much as we will have plenty in stock along with Gas lenses etc for all torches.
The WP20 was evaluated by a well respected Welder whose Website gets international views on a daily basis . And in his words " I love it " was his response to the torch . I can understand this as i really enjoy using the small WP9 and have used it on the 200DX ITIG 200 ( Mostly used on the ITig200) and the SuperUltra 205

Cheers

[buckshotscott]

Hey Guys,
Thanks for the input. I did find the connector I needed and I have already received the torch that Trackmaster had talked about. He is right, it is a nice torch for the money at least until the new torches are available here. The Dinse adapter I found and ordered is for the 1/2" dinse and accepts the 7/8-14 LH water through connection from the torch and has a 6' hose going to the cooler with the standard 5/8-18 LH connection on it. It was $38.87 with free shipping and comes from Indiana Oxygen. Here is the item number on ebay: 350316766533

Here is a link to the tech info and a hookup diagram too.

http://tectorch.com/detail/PDF/sh%20...%20diagram.pdf

Thanks again

[trackmaster]

Good find on the adapter Scott! I like it, nice and cleeeen, & good deal too. Thanx bud!

[twflyer]

Can you tell me if the small WP9 WP17 WP20 flex-head torches are available. I do not see them on the US website. Thanks

[Titan winch]

The WP9 -17 and 20 Should be available in the U.S in approximately 3 weeks. I reccomend calling and pre-ordeing from them as i am only sending a limited amount to them.
Cheers

[rengaw21001]

Hello Duncan,
What will be included with the new WP9 flex head torches, (for the PP205), as far as collets, caps, etc. I would assume pretty much the same as the WP26 that came with the unit.
It appears from your photo that the switch can be easily repositioned, and that would be great for me.
Thanks!
Steve

[Titan winch]

Hi Steve
My thought process with the WP9 was to keep everything fairly compact so i have the collets / holders /ceramics in shorter lengths .
i think we will also include a option for Gas Lenses in 1/16" 3/32" and 1/8" along with a 10 pack of 2% lanthanated and 2%Thoriated .As far as Ceramic Nozzles go i think i ordered from size #5 to #10.
Cheers
Duncan