Share
Results 1 to 14 of 14

Thread: Typhoon 230 Manual

  1. #1

    Default Typhoon 230 Manual

    I received my shiny new welder today. Before I purchased it I emailed sales to get a copy of the manual on September 3rd. No reply. I took a chance and ordered anyway. I expected it to come with a manual it. No luck.

    Could someone from sales please send me the manual?

    My original email is below.

    Regards,

    Andy

    Hello,

    I am interested in the Typhoon 230. Before purchasing I wanted to read through the manual. Unfortunately the manual isn't listed. I see one for the 330. In the manual list, there is a blank line above the 330 listing a file size of 4.19MB. Maybe a glitch on web page?

    Could you please either fix the web page or send me the manual?

    Thanks,

    Andy
    Everlast PP256
    Smith Oxy/Acetylene torch
    Atlas 10-F QC54 Lathe
    Seig X2 Mill modified for CNC

  2. Default

    Yeah,

    I notice that all unit manuals are usually downloadable as a PDF right from the Everlast sales page. For example, the 400EXT:
    Click image for larger version. 

Name:	400EXT.jpg 
Views:	139 
Size:	144.6 KB 
ID:	14201

    I’m guessing that the Typhoon units are so new, that Mark, from Everlast, may still revising those manuals. And they’ll undoubtedly be available shortly. And, getting a Typhoon unit as soon as possible was a good choice, I’m sure.
    Click image for larger version. 

Name:	Typhoon 230.jpg 
Views:	130 
Size:	13.9 KB 
ID:	14202
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  3. #3

    Default

    Quote Originally Posted by christian View Post
    Yeah,

    I notice that all unit manuals are usually downloadable as a PDF right from the Everlast sales page. For example, the 400EXT:
    Click image for larger version. 

Name:	400EXT.jpg 
Views:	139 
Size:	144.6 KB 
ID:	14201

    I?’m guessing that the Typhoon units are so new, that Mark, from Everlast, may still revising those manuals. And they?’ll undoubtedly be available shortly. And, getting a Typhoon unit as soon as possible was a good choice, I?’m sure.
    Click image for larger version. 

Name:	Typhoon 230.jpg 
Views:	130 
Size:	13.9 KB 
ID:	14202
    brused
    Christian,

    I'm hoping that it is just a bad link on the web page. It looks like there is a file there for it. They do have one for the 330. I would imagine that much of the information is the same.

    At least it arrived in one piece. When I bought my first Everlast 12 years ago, the plastic bezel was smashed, and the case bent. They did send me a new bezel. The plasma function on that one died after a few cuts. I never was able to get it to work. The Typhoon packaging was better, though box was a bit bruised and battered. The packing for the cables was all ripped open. I'm assuming that was for state side QA.

    Hopefully Everlast will get back to me soon, even if it is just to say "we're working on it. It will be available by <some date>".

    Thanks,

    Andy
    Last edited by Andy; 09-15-2023 at 05:34 PM.
    Everlast PP256
    Smith Oxy/Acetylene torch
    Atlas 10-F QC54 Lathe
    Seig X2 Mill modified for CNC

  4. Default

    Yeah,

    I don't even see a downloadable PDF manual available for the 330 Typhoon on its sales page at the moment.

    So, maybe they took it down, as a revised version will undoubtedly pop up shortly. That kind of a pattern wasn't too unusual for Everlast in the past. But the quality of the PDF manuals created by Everlast on the West Coast has gotten quite good, and they probably don't even allow whatever manual is produced at the Chinese factory to be sent with Everlast units now.

    Mark will undoubtedly pipe up soon. Patience, Grasshopper.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  5. #5

    Default

    Quote Originally Posted by christian View Post
    Yeah,

    I don't even see a downloadable PDF manual available for the 330 Typhoon on its sales page at the moment.

    So, maybe they took it down, as a revised version will undoubtedly pop up shortly. That kind of a pattern wasn't too unusual for Everlast in the past. But the quality of the PDF manuals created by Everlast on the West Coast has gotten quite good, and they probably don't even allow whatever manual is produced at the Chinese factory to be sent with Everlast units now.

    Mark will undoubtedly pipe up soon. Patience, Grasshopper.
    The 330 is there under the "Manuals" page: https://www.everlastgenerators.com/s...e923e86409.pdf

    From the Everlast videos it seems pretty straight forward, but still it would be nice to have that "new manual" smell
    Everlast PP256
    Smith Oxy/Acetylene torch
    Atlas 10-F QC54 Lathe
    Seig X2 Mill modified for CNC

  6. Default

    OK,

    There's access to the 330 manual (and it looks outstanding). Thanks for that.

    Honestly, one manual could be more easily produced to cover both Typhoon units. You know, a "Typhoon 230/330 manual", that makes distinctions in the text wherever there are slight differences besides the max amps. I mean, I think I've seen manuals for various product beyond Everlast that do that, because two manuals could be a tad redundant.

    But, you'll undoubtedly have a "Typhoon 230 manual" soon, for that super-advanced Everlast TIG unit, that has even more features than a Miller Dynasty unit, for one-third the price, and that comes with a better warranty, too.

    Thank you CHINA, and Everlast!
    Last edited by christian; 09-15-2023 at 11:25 PM.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  7. Default

    Oh,

    It just occurred to me that Everlast, and Mark, are no-doubt busy at FabTech at this time, which undoubtedly puts manual revising on the so-called back burner, I'm guessing.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  8. #8

    Default

    Christian,

    Ah, that would explain it. Thanks.

    Andy
    Everlast PP256
    Smith Oxy/Acetylene torch
    Atlas 10-F QC54 Lathe
    Seig X2 Mill modified for CNC

  9. Default

    Have you gotten a 230-specific manual yet?
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  10. #10

    Default

    Links are sent to customers.

  11. Default

    Nice, Mark!
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  12. #12

    Default

    Quote Originally Posted by performance View Post
    Links are sent to customers.
    Mark,

    I have not received anything yet.

    Thanks,

    Andy
    Everlast PP256
    Smith Oxy/Acetylene torch
    Atlas 10-F QC54 Lathe
    Seig X2 Mill modified for CNC

  13. #13

    Default

    call 877 755 9353 ext. 210. They can send it.

  14. Default

    Did you ever get your manual? I too am wanting to check out the manual prior to purchase...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •