Share
Results 1 to 4 of 4

Thread: Riding Mower Oil Cooler Custom Install With Everlast 210EXT AC/DC Welder

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. Default Riding Mower Oil Cooler Custom Install With Everlast 210EXT AC/DC Welder

    "Christian Livingstone shares a project he did by installing a 14-ounce aftermarket oil cooler to his zero-turn lawn mower. The motor is a 20hp V-twin Briggs, but the cooler install could be done on any brand. Christian installs a stainless steel dial thermometer gauge to verify his before-and-after findings about how effective the cooler is, and the indicator also acts as the dipstick. The muffler system is wrapped to lower the ambient air temperature near the oil cooler. Theres' a little welding involved, but the existing oil cooler bracket could undoubtedly be used by most people without any need for welding. And at the current Springtime temperatures when the project was completed, the reduction in oil temperature was -15 degrees cooler."

    Last edited by christian; 04-14-2023 at 03:11 AM.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •