-
Power i-MIG 275P Flash, Loud Pop, and Tripped Breaker
I'm looking for advice on whether it's feasible to have my Power i-MIG 275P repaired. I purchased it almost exactly 6 years ago and have used it sporadically, but it's always worked well. Yesterday I was setting up to weld on a project and dialing in settings on a test piece when the machine made a loud pop noise and the breaker was flipped. I tried resetting the breaker and the machine turned back on, but as soon as I started to weld again, the same thing happened. Now the machine won't start up without causing a flash, loud pop, and tripping the breaker. I checked the fuse in the machine and it is fine. I took the cover off to get a picture of what's going on when power is applied.

Any advice on whether this appears to be something that can be reasonably fixed?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules