Share
Results 1 to 3 of 3

Thread: 275p won't switch on

  1. Default 275p won't switch on

    I had to cut off the plug that came with my machine,275p

    At the moment I'm running a 15 amp NZ plug . Unfortuneately I threw out the first plug after cutting it open to see how the wires were attached.So after 3 weeks of other problems with some shipping fan related damage my confidnece on wiring the plug needs a boost.

    If the plug faces away from you with the lead going into the plug,is it okay for teal green bottom earth, Black power left and white thick neutral wire R right?

  2. #2

    Default

    Have no idea what you are referring to exactly. A 15A NZ plug?. There is NO neutral on a welder. So, maybe in the middle of the confusion about terminology and wiring that's the problem?

  3. #3
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,661

    Default

    New Zealand plug is my guess. They have 230 volt 50 Hz with a phase and neutral. So yes the green is earth and your black and white would be phase and neutral.
    Long arc, short arc, heliarc and in-the-dark!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •