Share
Results 1 to 13 of 13

Thread: Motorcycle gas tank

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Motorcycle gas tank

    I recently built this tank for a Norton project bike. The plan is to use a Triumph Thruxton fairing at front, so the fuel tank top skin had to match a Thruxton R shape. The bottom has to be made to fit the Norton Commando.
    I have a Thruxton R so it wasn't too difficult to copy the shapes and come up with a wooden buck to build from.
    Glen
    Click image for larger version. 

Name:	IMG_20201120_113033.jpg 
Views:	274 
Size:	148.6 KB 
ID:	14074Click image for larger version. 

Name:	IMG_20201215_111551.jpg 
Views:	277 
Size:	149.1 KB 
ID:	14075
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  2. #2

    Default

    Starting in to shape the sides and topClick image for larger version. 

Name:	IMG_20201120_113052.jpg 
Views:	262 
Size:	147.3 KB 
ID:	14076Click image for larger version. 

Name:	IMG_20201124_190905.jpg 
Views:	268 
Size:	144.1 KB 
ID:	14077
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  3. #3

    Default

    Using the English Wheel . I built this English Wheel in 2011 using the Power Ultra 205 in Tig mode. The tubing is very heavy wall , 5/16",which makes this English wheel very stiff and effective. As I recall, the amp control was cranked to the top and Pedal on the floor with the 205 when welding this thing up. That was just about perfect heat.

    Click image for larger version. 

Name:	IMG_20201120_113450.jpg 
Views:	253 
Size:	146.8 KB 
ID:	14078Click image for larger version. 

Name:	IMG_20201125_194507.jpg 
Views:	253 
Size:	146.7 KB 
ID:	14079
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  4. Default

    Very cool!

    I had a 1971 Norton 750 Commando. It was my favorite motorcycle. The tank had the coolest shape, even if a little small in capacity. And I loved those swept up exhaust pipes, with one on each side. The sound of that Norton was the best.

    I had a 1971 Triumph 500 Trophy too. It had those two bullet side pipes that came up under the thigh, which could get warm, as I didn’t have the heat shield for mine. Good times!

    But, those newer Thruxton R models are gorgeous. I mean, a little retro, a little cafe-style, while seeming like they’re still comfortable to ride. Three-cylinder, as I recall…

    Anyway, please let us all see how the process goes on to completion.
    Last edited by christian; 02-07-2021 at 04:28 PM.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  5. Default

    Oh,

    Is that red tank the completed project, as I see it does have those Norton-like indents?

    If so, please post a fuller pic of the cycle.

    I mean, the factory Thruxton tanks seemed to have a bit of that indent already, if I recall correctly.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  6. #6

    Default

    The red tank is on my Thruxton R. It holds 14.5 litres, not much more than a Commando Roadster tank (12litres).
    I wanted a bit more capacity so the buck was made with an extra inch of height vs the Thruxton tank.
    The goal was 18 litres minimum capacity.
    The end result is 22 litres. I picked up a lot of volume in the tank bottom shape, mostly in the cutout for the frame tube.
    Here are some more progress photos.Click image for larger version. 

Name:	IMG_20201203_104824.jpg 
Views:	251 
Size:	143.0 KB 
ID:	14080Click image for larger version. 

Name:	IMG_20201203_111416.jpg 
Views:	261 
Size:	144.5 KB 
ID:	14081Click image for larger version. 

Name:	IMG_20201203_122803.jpg 
Views:	253 
Size:	148.0 KB 
ID:	14082
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  7. Default

    Very nice!
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  8. Default

    Yeah,

    I did an aluminum gas tank for a zero-turn mower a few years ago. I went to an electric fuel pump on it, rather than gravity-feed, as the location was then much different. And, of course, diamond plate is a favorite material of mine, even before I got the AC TIG welder for aluminum.

    Click image for larger version. 

Name:	Layout.jpg 
Views:	263 
Size:	36.1 KB 
ID:	14083Click image for larger version. 

Name:	TankApart.jpg 
Views:	254 
Size:	64.3 KB 
ID:	14084

    That tank was about my first significant project doing AC TIG on aluminum. And, I chose a flip-top cap reminiscent of the one on that Norton, and is also similar to one on a Triumph TR6 car (interestingly, a 1971 too) that was my first car as a teenager. It was cast aluminum, so it was a little nasty getting a pass or two of clean bead on it. And I welded it on the underside, rather than a fillet up top.

    Click image for larger version. 

Name:	LongBead.jpg 
Views:	251 
Size:	51.4 KB 
ID:	14085Click image for larger version. 

Name:	MowerIndoor.jpg 
Views:	257 
Size:	34.3 KB 
ID:	14086

    Anyway, this tank ended up at 2.7 gallons, and the OEM poly tank was 2.2, which was a fitting increase since the mower also got a motor repower from a single 12.5 HP to a twin 20 HP.
    Last edited by christian; 02-07-2021 at 06:37 PM.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •