Share
Results 1 to 2 of 2

Thread: 48" Air/Hydraulic Brake Under $300

  1. #1

    Default 48" Air/Hydraulic Brake Under $300

    Went rummaging through the drops at my local metal supplier and made this 50" air/hydraulic brake that can bend 11ga steel on a tight radius it's full width. I added an 8 ton air/hydraulic ram from harbor freight to make bending effortless.
    I built it years ago and it still works awesome.

    Click image for larger version. 

Name:	50 inch brake -.jpg 
Views:	400 
Size:	128.7 KB 
ID:	13969

    Spray arc from the 250p using regular 75/25 gas.

    Click image for larger version. 

Name:	spray arc -.jpg 
Views:	350 
Size:	147.9 KB 
ID:	13970
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  2. Default

    Wow,

    Nice brake capacity and design on the cheap.

    The welds look great too!

    Nice to see your input here again.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •