Weld.Com Review Of New Everlast Lightning MTS275 w/ AC/DC TIG

[performance]

6-50. which is the US standard for all 240V 1 phase welders.

[gorillamotor]

I am using 0.030 MIG wire with my Lightning MTS 275. The rollers are labelled 0.9 and 1.2. I assume that I should be using the 0.9 side for my 0.030 wire. Right? Or are there others ones available?

[performance]

Jim,
If you look at the manual, you'll see that .9mm is .035". It is not to be used for .030" wire, which is .8. It will slip and not feed correctly. Incidentally, a welder that large should probably be used with at least .035" wire anyway. That is why it comes with .035" and .045" drive rolls. You can purchase additional drive rolls from the site. Look under Parts, and MIG. You find the double drive roll kits there.