Weld.Com Review Of New Everlast Lightning MTS275 w/ AC/DC TIG

[gorillamotor]

I know what HF & Lift mean but what does 'HF-Rem' & 'LIFT-Rem' mean?

[performance]

For use with a torch with a separate potentiometer and switch.

[gorillamotor]

That is what I thought.

Where can I get the gas connector fittings (no hose) that connect from the argon tank to back of the Lightning 275?

[performance]

Any welding shop. 5/8" CGA inert gas. Pretty standard.

[gorillamotor]

It is nice to see the full manual for the Lightning 275 on your website now. Really nice and fully detailed. Vast improvement over the manual that shipped with the unit.

[ftgiles]

It is nice to see the full manual for the Lightning 275 on your website now. Really nice and fully detailed. Vast improvement over the manual that shipped with the unit.

Yes, nice finally. Answered several questions I had. Like set all the parameters for the process before entering the Power Set. They all get used except the volts, amps and/or wfs. Also, before seeing the manual I trimmed the stud on the adapter for 8 inch spools to fit the Lincoln spools that have a very shallow hole. I guessed right. Sure enough, the Manual stated to do just that.

As far as the "thing" that was included in the box... embarrassing. Many things made absolutely no sense. Not sure why it was included. Hopefully by mistake. Including nothing would have been better for both customer and company.

So far I have about 10 hours of tig and mig on it. I like so far. I am using a CK 17 tig torch and a Bernard Q2 15' mig gun. The 36 mig gun is waaaaay big and heavy and short. Maybe I will try some spray with it.

[gorillamotor]

I am using a CK 17 tig torch and a Bernard Q2 15' mig gun. The 36 mig gun is waaaaay big and heavy and short. Maybe I will try some spray with it.

When and where did you get the Bernard Q2 gun at?