Share
Results 1 to 9 of 9

Thread: Tig Welding SS Brewery Fittings

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-12-2010, 03:43 PM #3
    woodchuck
    woodchuck is offline New Member
    Join Date
    Jul 2010
    Location
    Lloydminster, Alberta Canada
    Posts
    28

    Default

    Quote Originally Posted by performance View Post
    A third less current? That's a little much if you ask me.

    Pulsing might help.

    If you will post some pictures, then we might be able to see what's going on.

    Give us your setup parameters to start with: ie. tungsten type, how far stick out is, how far off puddle you are, polarity, amps, gas type etc.

    1/16" 2% thoriated tungsten, 1/8" stickout, 1/16" - 1/8" off puddle, DCEN, 40 amps, #6 cup, 15 on the flowmeter, mison Argon shielding gas.
    Last edited by woodchuck; 07-12-2010 at 05:42 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Gas fittings - Non-Standard? SuperUltra 205
    By toddcady in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 9
    Last Post: 07-07-2015, 11:41 PM
  2. DIY Cooler - What fittings to use?
    By RP62 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 14
    Last Post: 11-09-2011, 01:48 PM
  3. water cooler fittings
    By johnson697 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 06-02-2010, 01:12 AM
  4. water cooler fittings?
    By johnson697 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 0
    Last Post: 05-29-2010, 05:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules