Share
Results 1 to 13 of 13

Thread: Can you spare a ...

  1. #1
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default Can you spare a ...

    Shook the rust off and actually did a little welding today. Made a couple of small parts for some UTVs. Cut up some .095" wall square tube and some .25" plate.



    Clamped up to tack with Fireball mini mega square. I'm finding these things pretty handy. They get into a lot of places where other clamping systems just don't fit. Still waiting to assemble new welding table, so I need something to hold things square on the portable table.



    Left a pretty good gap so I could sink the welds near flush on the sides and have most of the reinforcement on the inside of the tubing.That way just an optional kiss with a flap disc and ready to paint. Add a filet on the inside and round over the outside corner joint. Weld out the plate, too.



    A little paint.



    And time to install.





    Inspector came over to check. Made one in 1.25" and one in 2" for the different front receivers. Still have one more to do, when that unit is around. Kubota changes things every few years, so none of these interchange. At least these two share a wheel hub pattern. The newest one changes that, too.



    It sure would be nice to have the clickable thumbnail system working again. It is a royal PITA to work with photos the way things are right now.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Welds.jpg 
Views:	1598 
Size:	138.4 KB 
ID:	13765   Click image for larger version. 

Name:	Clamps.jpg 
Views:	1807 
Size:	145.2 KB 
ID:	13764   Click image for larger version. 

Name:	Parts.jpg 
Views:	1723 
Size:	124.0 KB 
ID:	13763   Click image for larger version. 

Name:	Spare09.jpg 
Views:	1497 
Size:	142.2 KB 
ID:	13766   Click image for larger version. 

Name:	Spare12.jpg 
Views:	1589 
Size:	118.6 KB 
ID:	13767  

    Click image for larger version. 

Name:	Spare11.jpg 
Views:	1432 
Size:	143.2 KB 
ID:	13768   Click image for larger version. 

Name:	Spare10.jpg 
Views:	1548 
Size:	129.1 KB 
ID:	13769  
    Long arc, short arc, heliarc and in-the-dark!

  2. Default

    Hey,

    Way cool, dude!

    Interesting squares, as those little removable tabs are neat, too.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  3. Default

    Yeah,

    It just occured to me that your photos post as open images in this thread.

    Lately, my pic uploads to a thread have been unopened images, that took a click and a new window to see each one.

    Let me use your thread, if you don't mind, to check that myself.

    Click image for larger version. 

Name:	OhNo.JPG 
Views:	473 
Size:	128.4 KB 
ID:	13770

    Yeah, I'm still not getting open images to a thread somehow.
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  4. #4

    Default

    Quote Originally Posted by christian View Post
    Yeah,

    It just occured to me that your photos post as open images in this thread.

    Lately, my pic uploads to a thread have been unopened images, that took a click and a new window to see each one.

    Let me use your thread, if you don't mind, to check that myself.

    Click image for larger version. 

Name:	OhNo.JPG 
Views:	473 
Size:	128.4 KB 
ID:	13770

    Yeah, I'm still not getting open images to a thread somehow.
    You have to upload and then manage attachments under "go advanced" then select and drag images to insert on line 1,2,3 etc.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  5. Default

    Hey,

    Thanks for that!
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

  6. #6

    Default

    Very good craftsmanship. One tool I don't have is a good tubing bender. I have a pipe bender, but that kind of flat spots/kinks the tubing if it is too light. It would cut down on mitering a good bit.

  7. #7
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by zoama View Post
    You have to upload and then manage attachments under "go advanced" then select and drag images to insert on line 1,2,3 etc.
    I remember how nice it was when you could just have nice inline thumbnails that linked to the full size images. Those were the days.

    Click image for larger version. 

Name:	11weld.jpg 
Views:	589 
Size:	145.0 KB 
ID:	13771


    "Uploads not utilized within one hour will be deleted" I wish that were true, too.
    Last edited by Rambozo; 03-28-2018 at 03:29 AM.
    Long arc, short arc, heliarc and in-the-dark!

  8. #8

    Default

    What do you make your cuts with Rambozo they look nice & straight.

    Mark
    Garage stuff

    Everlast 255 EXT

    Miller 251 mig
    30A spool gun

    Miller 211 mig

    Lincoln SP 250 mig

    Lincoln buzz box

    Thermal Dynamics
    Pakmaster 75XL plasma

  9. #9
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by oleblu72 View Post
    What do you make your cuts with Rambozo they look nice & straight.

    Mark
    Northern Tool Dry Cut Saw
    I was going to post an update on this saw, but since they discontinued it, meh. A few people on this forum have them with no complaints.
    I did a review when I got it that you can find HERE
    Since then I tuned up the vise a bit. I really like the saw.
    Long arc, short arc, heliarc and in-the-dark!

  10. #10

    Default

    I have a Dewalt abrasive cutoff saw and she doesn't like to cut real straight like most saws with a abrasive blade.

    Mark
    Garage stuff

    Everlast 255 EXT

    Miller 251 mig
    30A spool gun

    Miller 211 mig

    Lincoln SP 250 mig

    Lincoln buzz box

    Thermal Dynamics
    Pakmaster 75XL plasma

  11. #11
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by oleblu72 View Post
    I have a Dewalt abrasive cutoff saw and she doesn't like to cut real straight like most saws with a abrasive blade.

    Mark
    Try a Makita blade. I found those did quite a bit better than other brands back when I used an abrasive chop saw.
    Long arc, short arc, heliarc and in-the-dark!

  12. #12

    Default

    Thanks Rambozo I'll have to give one a try. I thought about buying a saw that use's a metal blade. I have a Milwaukee hand held circular steel saw it cuts pretty fast considering it looks like it has a wood blade on it.

    Mark
    Garage stuff

    Everlast 255 EXT

    Miller 251 mig
    30A spool gun

    Miller 211 mig

    Lincoln SP 250 mig

    Lincoln buzz box

    Thermal Dynamics
    Pakmaster 75XL plasma

  13. #13

    Default

    Quote Originally Posted by oleblu72 View Post
    I have a Dewalt abrasive cutoff saw and she doesn't like to cut real straight like most saws with a abrasive blade.

    Mark
    I am just drifting through the threads... I have one of these. I like it and it works nice. It is not a pro saw, but I have used it a fair amount.If you do a lot of cutting I would switch to the higher count tooth blade. This a general purpose blade, but I have made a lot of cuts with it. The biggest drawback is when you change the cut from 90 to 45 and back, you need a square to get it correct. The plus it was a pretty good price. I think I got the best price by buying through Menards online and had it shipped to me. (if I remember correctly)

    Oh BTW A couple tips on using a cold saw to make the blade last. Make sure your work is secure, if the piece jumps it will break teeth. Every broken tooth on the blade was from something that moved. Cut slow and don't force. Also when starting a cut, try to start cutting on an edge, not a flat. IE on on square stock start on a corner not a flat. Sometimes that is hard to do. Just something the saw people said makes the blades last longer. (Blade runs cooler???)

    http://www.evolutionpowertools.com/u...hopsaws/rage2/

    Hope I didn't hijack the thread. I think I have posted a review on the saw a while back.
    Shade tree MIG welder.
    Now a Shade tree TIG welder.

Similar Threads

  1. Project #3 from Spike : Spare Tire Modular Tool Stands
    By Spike in forum Other Custom Fabrications
    Replies: 7
    Last Post: 02-16-2012, 08:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •