Share
Results 1 to 5 of 5

Thread: Electrical Grounding Rod Driver Implement for a Pneumatic Chisel Gun

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2014
    Location
    Westerville, Ohio
    Posts
    72

    Default Electrical Grounding Rod Driver Implement for a Pneumatic Chisel Gun

    A good used SDS demolition hammer/drill on Craigslist still starts north of a C note. Let's see if $10.00 worth of Harbor Freight butchered and cobbled together originals can accomplish the ten foot electrical grounding rod driving chore?

    Buy pneumatic chisel set and half-inch drive 3/4" socket from Harbor Freight. Test fit socket/chisel combination on gun cutting to length. Hand lathe the chisel on the bench grinder to decrease the diameter of the cut end so it will fit in the through-hole of the socket. Weld the chisel/socket from both ends.



    Click image for larger version. 

Name:	5993.jpg 
Views:	291 
Size:	70.8 KB 
ID:	13747
    Click image for larger version. 

Name:	5994.jpg 
Views:	290 
Size:	69.6 KB 
ID:	13746
    Click image for larger version. 

Name:	5995.jpg 
Views:	340 
Size:	91.7 KB 
ID:	13745
    Click image for larger version. 

Name:	5996.jpg 
Views:	286 
Size:	87.9 KB 
ID:	13744
    Click image for larger version. 

Name:	5997.jpg 
Views:	269 
Size:	89.3 KB 
ID:	13743
    Last edited by fyidiy; 03-22-2018 at 08:12 PM.

Similar Threads

  1. Electrical info needed
    By Blaze in forum General Welder Questions
    Replies: 28
    Last Post: 03-23-2014, 08:25 PM
  2. Electrical Circuits
    By lucky13 in forum General Welder Questions
    Replies: 20
    Last Post: 05-08-2012, 12:51 PM
  3. powerarc 200 electrical hookup.
    By bobwills in forum Stick Welding (SMAW)
    Replies: 16
    Last Post: 12-27-2011, 08:46 PM
  4. HF grounding
    By hesstx in forum TIG Welding (GTAW/GTAW-P)
    Replies: 26
    Last Post: 11-22-2011, 11:36 PM
  5. Powertig 250 EX on it's way.... Electrical question?
    By CGCINC in forum General Welder Questions
    Replies: 11
    Last Post: 10-22-2011, 11:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •