Share
Results 1 to 2 of 2

Thread: Powermts 221 sti

  1. Default Powermts 221 sti

    Hello, I just received my POWERMTS 221 STI in the mail and have a few questions. What are you all using to split or T into the two different gases? Also where can I find a digital copy of the manual?

  2. #2

    Default

    I don't see a manual so maybe it's in the works. I use common 1/4" air line quick connects for gas. Put the male end on the machine side with about 1 foot of line and put the female ends on the lines from your bottles. I've been doing this for 7 years with no problems whatsoever. You'll also need 1/4" npt to hose barb connectors to attach them... or you can buy a cheap air line or two and cut them up like in these pics from an old tig/plasma cutter combo I had in 2011. I put the male connector on the machine side now.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1156 - Copy.jpg 
Views:	748 
Size:	142.7 KB 
ID:	13761   Click image for larger version. 

Name:	IMG_1155 - Copy.jpg 
Views:	747 
Size:	144.9 KB 
ID:	13762  
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

Similar Threads

  1. PowerMTS 251Si (2018)
    By Bballer182 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 8
    Last Post: 12-25-2017, 12:46 AM
  2. Can you use AHP TIG Accessories on PowerMTS 200
    By WeldMore in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 4
    Last Post: 03-17-2016, 03:56 PM
  3. PowerMTS 251Si owners I need your help.
    By seaarc24 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 5
    Last Post: 11-05-2015, 01:49 AM
  4. New Videos for the PowerMTS 250s
    By performance in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 14
    Last Post: 04-30-2013, 01:11 PM
  5. Thank You Alex for geting me PowerMTS 400
    By cacrab in forum Customer Testimonials
    Replies: 2
    Last Post: 09-14-2011, 01:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •