Quote Originally Posted by Rambozo View Post
It appears not with the current CK line. While the 9 and 17 share a torch connector size, CGA-A (they even share the same cable) the 26 has a larger CGA-B fitting. Again there are adapters from Western and WeldCraft to allow this, but I don't see one from CK right off. So it won't be plug and play out of the box. The stock handle would also not likely fit. I have a mixture of some older products and some of those are interchangeable. I should have checked the current lineup before speaking up.
Well, none of us can keep track of it all, and speaking for myself you have been really helpful in explaining some of this connector info. I appreciate it.

Alan