Share
Results 1 to 6 of 6

Thread: Adapter for weld tec

  1. Default Adapter for weld tec

    Hello all. I just took delivery of a 325 ext tig. I really like my speedway and weld tec torches on my Miller welder and wish to get more to use on the everlast. Does anyone know where to get adapters that fit the “35-70” connectors that everlast uses? Thank you, Steve.

  2. #2

    Default

    Miller uses them. Your torch companies have them.

  3. Default

    Quote Originally Posted by performance View Post
    Miller uses them. Your torch companies have them.
    No, miller and everlast are not compatible. I am having a difficult time.

  4. #4
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,659

    Default

    You have to be more specific about what Miller you are talking about. All the newer ones are the same DINSE connectors as Everlast, but Miller often has the gas through DINSE where the argon runs through a hole in the middle. Your LWS should have an adapter for that. If your Miller is an older model it could have any number of different connectors, as that could be specified when purchased. Need a picture or just take it in to your local shop to figure out what you need.
    Torches usually come with plain threaded ends, and a bunch of adapters are offered to mate with various machines.

    You can find all the bits and bobs at the tech torch homepage.
    http://www.tectorch.com

    Specifically the DINSE stuff is HERE
    Long arc, short arc, heliarc and in-the-dark!

  5. Default

    Ok, thanks. I will drag one in to my welding store.

  6. #6

    Default

    And here is the page from Weld Tec.

    Miller standard is DINSE. It has been for a number fo years. If you have some ancient equipment, then, you may have a power block adapter, or your unit may have been special ordered with TWECO connections...in which case your unit isn't standard equipped. But yes, DINSE is pretty much the standard these days unless you have something TWECO equipped.

    In fact here is a direct link showing you on the aforementioned site by Rambozo. ( I think he included it as well)

    http://www.tectorch.com/WeldTec%20Qu...ctor_guide.pdf

Similar Threads

  1. Everlast MTS 200 1 lb. Spool Adapter
    By jheggie in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 2
    Last Post: 04-08-2015, 07:34 PM
  2. How to weld TALL weld beads on 1.6mm thick Aluminum Tube?
    By Welderooni in forum TIG Welding (GTAW/GTAW-P)
    Replies: 4
    Last Post: 10-08-2013, 02:49 PM
  3. dinse adapter for 210ext
    By miker2 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 11-06-2012, 04:39 AM
  4. adapter for new tig torch
    By acourtjester in forum Other Custom Fabrications
    Replies: 3
    Last Post: 07-03-2011, 12:34 AM
  5. PowerArc used with Tig power adapter??
    By Oxide00 in forum Stick Welding (SMAW)
    Replies: 8
    Last Post: 06-06-2011, 08:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •