Different torch questions

[Gunther]

I am trying to get a comparison on the different standard and optional tig torches for the powerpro 256Si. I think I may have found one of them on the CK site but am not sure. If anyone has links to the specific standrd and optional models that would be great.

[zoama]

You can add any CK torch you want. Take the free one that comes with the machine and have it for a spare. I use a CK130F with 25' superflex lead mostly. It offers 100% duty cycle at 130 amps in AC and DC. I regularly hit 160 amps for short welds with no problems.
2% lanthanated tungsten size 3/32 will handle most welding.

[Gunther]

You can add any CK torch you want. Take the free one that comes with the machine and have it for a spare. I use a CK130F with 25' superflex lead mostly. It offers 100% duty cycle at 130 amps in AC and DC. I regularly hit 160 amps for short welds with no problems.
2% lanthanated tungsten size 3/32 will handle most welding.

Thanks for your reply. Btw, I noticed you are a super moderator, does that mean you have a cape or even a super hero outfit?

[zoama]

Thanks for your reply. Btw, I noticed you are a super moderator, does that mean you have a cape or even a super hero outfit?

Nah, just a helmet and matching boots.

[christian]

Ha, ha, ha...

That's a good one!

Nah, just a helmet and matching boots.

[everlastsupport]

Ha, ha, ha...

That's a good one!

Should I change that to just admin?

[zoama]

Should I change that to just admin?

Sure thing.