Share
Results 1 to 6 of 6

Thread: 1950 Chevrolet Sedan Custom

  1. #1

    Default 1950 Chevrolet Sedan Custom

    Click image for larger version. 

Name:	AC Fin 2.jpg 
Views:	44 
Size:	129.5 KB 
ID:	13499Click image for larger version. 

Name:	AC Fin 1.jpg 
Views:	54 
Size:	143.3 KB 
ID:	13500Here was my 18 month project, My Everlast plasma and 200Dx were involved in this project.Click image for larger version. 

Name:	car may 2015 1 pic.jpg 
Views:	49 
Size:	148.7 KB 
ID:	13497Click image for larger version. 

Name:	car may 2015 2 pic.jpg 
Views:	54 
Size:	150.2 KB 
ID:	13498
    PowerTig 200DX
    Supercut 50P
    PowerTig Micro 185 SOLD GREAT MACHINE
    Millermatic 200
    Miller Thunderbolt
    Jet 1340 Lathe
    Jet 20" Drill Press
    Jet 12" Wet Band Saw
    Kalamazoo H7 Bandsaw
    Forward 12,000 lb 4 Post Lift

  2. #2

    Default

    Beautiful car. Care to elaborate on the cutting and welding ?
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  3. #3

    Default

    Very nice, done just right for me. Not too much. Great job.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  4. #4

    Default

    I replaced the rear quarters with ones from other cars, Welded up over 250 trim holes. Tig welded all the aluminum engine brackets as i built serpentine drive for the 6 cyl engine. The hood was shaved and crowned welded solid down the middle. Custom built tube bumpers from .090 tubing all tig welded. Shortened the front and rear pans behind the bumpers , tig work also.
    PowerTig 200DX
    Supercut 50P
    PowerTig Micro 185 SOLD GREAT MACHINE
    Millermatic 200
    Miller Thunderbolt
    Jet 1340 Lathe
    Jet 20" Drill Press
    Jet 12" Wet Band Saw
    Kalamazoo H7 Bandsaw
    Forward 12,000 lb 4 Post Lift

  5. #5

    Default

    awesome! love the bumpers, ya hand bend or roll for the curve? I was thinking of doing that kind of bumper on my tahoe, larger bar above smaller below, and then 3/16 sheet between them just under flush level to look like a stock bumper kinda.

    Barry

  6. Default

    Hey,

    Nice car resto and mods.

    Interestingly, I think I notice from the car photos your location and that I've stayed at your rental/retreat area for a weekend gathering on a couple of occasions.

    Quote Originally Posted by cbmkr View Post
    Click image for larger version. 

Name:	AC Fin 2.jpg 
Views:	44 
Size:	129.5 KB 
ID:	13499Click image for larger version. 

Name:	AC Fin 1.jpg 
Views:	54 
Size:	143.3 KB 
ID:	13500Here was my 18 month project, My Everlast plasma and 200Dx were involved in this project.Click image for larger version. 

Name:	car may 2015 1 pic.jpg 
Views:	49 
Size:	148.7 KB 
ID:	13497Click image for larger version. 

Name:	car may 2015 2 pic.jpg 
Views:	54 
Size:	150.2 KB 
ID:	13498
    Everlast 210 EXT (2015)

    www.youtube.com/newjerusalemtimes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •