2015 powerplasma 50 no output

[WhitsonMetal]

Called and got RMA info so I guess it's back to the ol grinder and drill press for a while.

[Steve]

Called and got RMA info so I guess it's back to the ol grinder and drill press for a while.

I have noticed that sometimes I forget to put the swirl ring into the torch when I replace the consumables. When you take the tip and electrode out of the torch, the ring sometimes has a habit of falling off and rolling away. That can cause the torch not to light up. Not sure if the newer PP 50's have that ring ( a brown round little guy that fits at the base of the tip) but my older one does and it sometimes needs to be replaced.