Yet another Kubotoa RTV conversion. This one is a little different. Larger tank than last time and everything mounted up higher for more destructive areas. Found some real aggressive tires to give it some more bite, too.

The original plan...

Click image for larger version.  Name: Model1.jpg  Views: 841  Size: 48.6 KB  ID: 13384 Click image for larger version.  Name: Model2.jpg  Views: 863  Size: 36.0 KB  ID: 13383 Click image for larger version.  Name: Model3.jpg  Views: 835  Size: 50.2 KB  ID: 13382

Here is the basic framing. You can see I had to do a little heat straightening on a few pieces after the welding. Next time I need to plan out the order of welding a little better.

Click image for larger version.  Name: Frame3.jpg  Views: 809  Size: 76.9 KB  ID: 13388 Click image for larger version.  Name: Frame5.jpg  Views: 828  Size: 131.8 KB  ID: 13387 Click image for larger version.  Name: Frame6.jpg  Views: 804  Size: 145.6 KB  ID: 13386 Click image for larger version.  Name: Frame7.jpg  Views: 852  Size: 126.9 KB  ID: 13385

And the finished product. Stayed pretty close to the plan. This time I added a hydraulic lift to make service a lot easier.

Click image for larger version.  Name: Final1.jpg  Views: 866  Size: 109.7 KB  ID: 13392 Click image for larger version.  Name: Final2.jpg  Views: 864  Size: 141.1 KB  ID: 13391 Click image for larger version.  Name: Final3.jpg  Views: 834  Size: 123.5 KB  ID: 13390 Click image for larger version.  Name: Final4.jpg  Views: 876  Size: 107.9 KB  ID: 13389

Pretty much all the welding was done with my little PA140 in TIG mode.