Consumables

[rkinken]

I have a super ultra 205 machine and I'm wondering if consumables for a different plasma torch would work on the one that came with mine. It's an AG-60 plasma torch.

[punisher]

All I see is an SG-55 as a cross reference for parts. Cannot believe how cheap consumables are on Amazon and Ebay. I can only dream (PT-60 owner).

[rkinken]

It was disappointing yesterday. I was trying to cut something yesterday with my machine and had the air at .2 kph or whatever and I was going through contact tips left and right. I've been using a plasma cutter for 10 yrs and have never done that. It was really odd. I never hit the material I was cutting with the tip either.

[performance]

65 psi? not sure what .2kph is. What amperage and what diameter nozzle were you using? You weren't trying to cut with the pilot arc were you? Could you tell when the cutting arc kicked in? There are different quality levels of those consumables.

[rkinken]

65 psi? not sure what .2kph is. What amperage and what diameter nozzle were you using? You weren't trying to cut with the pilot arc were you? Could you tell when the cutting arc kicked in? There are different quality levels of those consumables.

What are the part numbers for the absolute best consumables for the plasma torch that comes with that unit?

[performance]

What are the part numbers for the absolute best consumables for the plasma torch that comes with that unit?

If you could answer the above questions, I can help recommend something, plus tell me what thickness and amps you were using.

[rkinken]

As far as nozzle goes I was using whatever was sent with the original package, the amps I was set at 45 amps cutting 1/2" material. Yes I do know when the arc was licking in and not just using the pilot arc. Like I stated before this isn't the first plasma machine I've used.