Results 1 to 2 of 2

Thread: CNC Ports pins 12 or 14

  1. Default CNC Ports pins 12 or 14

    I have noticed that hypertherm cutters use a 14 pin cnc connector and the everlast products (Atleast in the IOM) uses a 12 pin.

    Why the difference? Assuming it doesn't really matter but was curious.


  2. #2


    Hypertherm did have them when we first came out with ours for one, or at least when we started planning. But I would assume theirs is proprietary anyway.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts