Share
Results 1 to 17 of 17

Thread: 325 Arc starting issues, spudders on hi freq.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    From what I was told, was the internal arc would create some metal transfer over time inside the tube and would erode and start would weaken.

  2. #2
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by performance View Post
    From what I was told, was the internal arc would create some metal transfer over time inside the tube and would erode and start would weaken.
    The reason I ask is that at a friends shop, I just had a chance to try a new Dynasty 200 with the Blue Lightning which I believe is Miller's pointless system, and the starts were amazing. Like it would jump a 1/2" to 3/4" gap or better. It would also zap you right through your gloves if you did something dumb. This compared to his older Dynasty 700 that you practically have to lift start the HF is so wimpy.
    Long arc, short arc, heliarc and in-the-dark!

Similar Threads

  1. PP256 High-Freq. wont turn off!!!
    By tensecond408 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 5
    Last Post: 03-07-2014, 09:12 PM
  2. Starting an arc
    By Effinay in forum TIG Welding (GTAW/GTAW-P)
    Replies: 9
    Last Post: 05-23-2012, 02:34 AM
  3. Starting a new cut mid way
    By trickbiker in forum Everlast Plasma Cutters (PAC)
    Replies: 4
    Last Post: 01-16-2012, 09:25 PM
  4. 250 ex Arc starting
    By trackmaster in forum Customer Testimonials
    Replies: 3
    Last Post: 10-21-2010, 04:40 PM
  5. PM 256 Hi-Freq quit working
    By Tony_F in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 8
    Last Post: 08-19-2010, 09:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •