Share
Results 1 to 4 of 4

Thread: Trade: CAT250D (TIG/ARC/Plasma) for I-MIG 140E

  1. Default Trade: CAT250D (TIG/ARC/Plasma) for I-MIG 140E

    Yes,

    I have an extraneous DC welder/plasma cutter. I’ve owned it since new and it’s still new-like in its condition, even though I’ve done several cool projects with it over a period of about five years.

    Name:  CAT250D.jpg
Views: 907
Size:  157 Bytes

    I upgraded to slightly better TIG and Plasma torches, moved the power switch to the front, and added a quick-disconnect to the gas line on the back. A lot of plasma consumables for the torch are included, along with an ARC stinger, ground cable, upgraded flowmeter. and several extras to go with the unit.

    This is a dual-voltage unit that is undoubtedly identical to the many Lotos CAT520D units and others under other labels. They’re still being produced too, I believe. They’re Mofset inverters. This one is wired for a foot pedal, but one is not included; they’re available for about $90.

    Ideally, as a trade, the I-Mig 140E must be in great condition and include the typical included accessories. I give an assigned cash value to both units (used, like new) at about $300, before shipping.

    Otherwise, other similar trades may be considered.

    Peace be with you all,
    C. Livingstone

  2. Default

    Gee,

    It doesn't look like the image that I've uploaded can be opened or seen here on the forum, so I'm including a link to a quick video that I've uploaded to my YouTube Channel, which shows the unit and what's included.

    https://youtu.be/IwurUCM3ByU

    Peace to you all,
    C. Livingstone

  3. Default

    Gee,

    Maybe someone here would consider selling their used I-Mig 140E to me instead? I could probably then sell my combo unit locally, without too much trouble I suppose.

    Peace to you all,
    C. Livingstone

  4. Default

    OK,

    There doesn't seem to be much interest on this swap offer, so I think I'll withdraw it, as the shipment cost may seem to take some of the fun out of it, anyway. I may seek to sell or trade the unit locally, or just keep it for the plasma cutting ability. So, I've removed the video clip from my YouTube Channel, too.

    Peace to you all,
    C. Livingstone

Similar Threads

  1. I-mig 140E trade? or sell
    By pavetim in forum Buy, Sale or Trade
    Replies: 5
    Last Post: 03-30-2016, 09:15 PM
  2. 140e awesome little welder
    By johnson697 in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 3
    Last Post: 08-26-2015, 09:50 AM
  3. alluminum with I-rmig 140e
    By girvin in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 28
    Last Post: 05-06-2015, 10:30 AM
  4. 140e consumables?
    By johnson697 in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 2
    Last Post: 03-15-2015, 12:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •