Share
Results 1 to 12 of 12

Thread: Everlast welding cart

  1. Default Everlast welding cart

    Here's my nearly completed multi process welding cart for my MTS211Si. Paint was the closest I could find off the shelf. Holds two tanks (for mig and tig), and has a large drawer. Built with 1" square tubing and 1/8" plate... it is solid for sure.

    (I tried attaching pics but the forums are acting strangely...)

    https://drive.google.com/file/d/0Byu...ew?usp=sharing
    https://drive.google.com/file/d/0Byu...ew?usp=sharing

    I'll post better pics in this thread once the forum starts cooperating.
    Last edited by mts211si; 10-12-2015 at 03:57 AM.

  2. #2

    Default

    Very nice, the paint matches perfectly. I'm glad to see someone else using stem casters.
    You're right about the forum acting weird, it's been getting worse for a few weeks.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  3. Default

    Thanks!

    Click image for larger version. 

Name:	uploadfromtaptalk1444624219977.jpg 
Views:	831 
Size:	105.3 KB 
ID:	13124Click image for larger version. 

Name:	uploadfromtaptalk1444624231668.jpg 
Views:	730 
Size:	110.5 KB 
ID:	13125



    Sent from my SCH-I605 using Tapatalk

  4. #4
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Very nice indeed. I like the big drawer. Is that for dust free helmet storage?
    Great color match. too. I see you even did your mag gun holder.
    Long arc, short arc, heliarc and in-the-dark!

  5. Default

    Quote Originally Posted by Rambozo View Post
    Very nice indeed. I like the big drawer. Is that for dust free helmet storage?
    Great color match. too. I see you even did your mag gun holder.
    Thanks, and nice catch on the matching holder! Honestly, I haven't decided what's going in the drawer yet, but my helmet is definitely a top contender.

    I'm planning to grab better pics soon. It's hard to see, but there is a movable bar in the back securing the tanks. Two spin off knobs hold it down, and there is another position more forward if there is only a single bottle. The forward position is at a slight angle to keep the tank from moving side to side. I'm putting some pvc edge trim on all four side cable holders. That will be especially helpful where the wire spool access door opens. The casters were used since it will be "parked" in a tight spot sideways, allowing it to be stored out of the way.

    Thanks for looking.

    Sent from my SCH-I605 using Tapatalk

  6. #6

    Default

    You can add another removable bar to the top back as well if you go for taller tanks. Color match is good too. Looks like you covered all the bases. Good job.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  7. Default

    Added the edging around the cable hooks. Here's some more pics:



    Sent from my SCH-I605 using Tapatalk

  8. #8

    Default

    Dang, wish my place was that organized. Nice cart, like the way you can make it disappear againt the wall, I have locked rear wheels on mine.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  9. Default

    Thanks!

    Sent from my SCH-I605 using Tapatalk

  10. #10
    Join Date
    Aug 2017
    Location
    Clifton, Texas
    Posts
    12

    Default

    Quote Originally Posted by mts211si View Post
    Added the edging around the cable hooks. Here's some more pics:

    Optical illusion!

    The photo of the drawer pulled out looks WAAAY longer than the space where it fits!

  11. #11
    Join Date
    Jan 2019
    Location
    Montreal, Qc, Canada
    Posts
    1

    Default

    What's the paint you used to get this good of a match?

    Was it some off the shelf spray can or did you get a Pro shop mix you a pint?
    ________________________________
    Richard V.
    Canukystan Fabricobler, new to TIG...

    PowerTIG 200DV

  12. #12

    Default

    Paint code is RAL6018. Easy to match if you have a local paint store.

Similar Threads

  1. Tig Welding Cart
    By Depdog in forum Other Custom Fabrications
    Replies: 5
    Last Post: 02-25-2014, 02:51 AM
  2. Welding Cart - Power Cart 250 - opinions?
    By ScottRussell in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 12-05-2012, 02:19 PM
  3. Everlast Welding Cart
    By RP62 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 10
    Last Post: 10-28-2011, 03:56 PM
  4. First Welding Project - You guessed it... a welding cart
    By EmptyNester in forum Hobyist Projects
    Replies: 19
    Last Post: 10-12-2011, 04:30 PM
  5. welding cart
    By shawn in forum Other Custom Fabrications
    Replies: 7
    Last Post: 04-11-2011, 12:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •