Share
Results 1 to 3 of 3

Thread: PowerARC Video

  1. #1

    Default PowerARC Video

    We've just added a video to youtube. It covers the PowerARC welders, in particularly the 200. But, both units are very similar in features except output.

    http://www.youtube.com/watch?v=QVkTYSHRXrY

  2. #2

    Default

    A good video, the amp settings are correct and the rod burn nice and easy the same as I'm getting on my powerarc 200.

    If you want to weld this is the welder for you, it does the job and it has a nice smooth arc making even a newbie look good.

  3. #3

    Default

    Geezer,

    The PowerArc has a very forgiving amp range on the low end, especially for cellulose rods. I have run 3/32 6010 5P+ in the 50's and 1/8 7018's in the 90's with little problem.

    I know of one commercial customer replacing his Miller Maxstar/CST fleet with our PA 200's as he needs them. So far, I think he has bought 5 or 6 and according to the dealer is well pleased and his workers like them on the construction site. Even they are using them for DC tig with a gas valve torch. Excellent arc capabilities.
    Last edited by performance; 06-17-2010 at 06:34 AM.

Similar Threads

  1. PowerArc 300
    By Shield Arc in forum Stick Welding (SMAW)
    Replies: 6
    Last Post: 11-19-2014, 01:28 PM
  2. Video review of PowerArc 160 STH TIG
    By youngnstudly in forum Customer Testimonials
    Replies: 14
    Last Post: 07-09-2014, 08:02 AM
  3. Powerarc 140 on 208 vac
    By daverepair in forum Stick Welding (SMAW)
    Replies: 18
    Last Post: 05-16-2012, 05:24 AM
  4. New PowerArc 200
    By Tasha71822 in forum Customer Testimonials
    Replies: 6
    Last Post: 11-06-2011, 12:21 AM
  5. New PowerARC 140 ST Video
    By performance in forum Stick Welding (SMAW)
    Replies: 3
    Last Post: 10-14-2011, 01:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •